CypressTouch_Dlg-Dialog_Configurator_AVRTouchCapSense Component_AD

現在、バージョン 16.0. をご覧頂いています。最新情報については、バージョン CypressTouch_Dlg-Dialog_Configurator_AVRTouch((CapSense Component))_AD の 21 をご覧ください。


The CapSense Component dialog.

Summary

This dialog allows you to configure a touch sensor component on a schematic sheet, when creating planar capacitive sensor patterns on your PCB, for use with the range of Cypress® CapSense® and PSoC® controllers.

For a detailed overview of Cypress CapSense Touch Sensor support in Altium Designer, see Cypress Touch Controls.

Access

The CapSense Component dialog can be accessed by:

  • Right-clicking over the placed sensor component and choosing the Configure command from the context menu.
  • Double-clicking on the placed component to access the Properties for Schematic Component dialog, then clicking the Configure button at the bottom-right of that dialog.

Options/Controls

  • Sensor Component Type - this drop-down field essentially allows you to switch between the different supported sensor components. The following sections detail the various components available.
Note that while you can use the dialog to quickly switch to a different sensor component type, and the graphical symbol will update accordingly, the component's Comment and Description, as well as the Design Item ID (for the linked library component) will remain reflective of, and referencing, the original placed sensor type.

CircularButton


CapSense Component dialog - CircularButton sensor type.

Use the CircularButton component to implement a button sensor. This is a self-capacitance, zero-dimensional sensor, with a single channel for connection directly to a Cypress PSoC controller. The resulting sensor pattern on the PCB is a simple circular-shaped electrode.

Options/Controls

  • Button Outer Diameter - the outer diameter for the sensor pattern (between 5mm and 15mm).
  • Button Inner Diameter - the inner diameter for the sensor pattern (this should be less than the outer diameter, and a minimum of 5mm).

RectangularCurvedEdgeButton


CapSense Component dialog - RectangularCurvedEdgeButton sensor type.

Use the RectangularCurvedEdgeButton component to implement a button sensor. This is a self-capacitance, zero-dimensional sensor, with a single channel for connection directly to a Cypress PSoC controller. The resulting sensor pattern on the PCB is a simple rounded-rectangular-shaped electrode.

Options/Controls

  • Button Height - the height of the sensor pattern (between 5mm and 15mm).
  • Button Width - the width of the sensor pattern (between 5mm and 15mm).
  • Button Inner Diameter - the inner diameter for the sensor pattern (this should be less than the width/height, and a minimum of 5mm).

LinearSlider


CapSense Component dialog - LinearSlider sensor type.

Use the LinearSlider component to implement an n-segment linear slider sensor. This is a self-capacitance, one-dimensional sensor for connection directly to a Cypress PSoC controller (each segment in the pattern connects to a separate pin of the Controller). The resulting sensor pattern on the PCB is comprised of a 1xn array of double-chevron-shaped electrodes, where n is the number of segments specified. In essence, you are specifying n separate sensors placed physically adjacent to each other. You have global control over the height and width of the constituent sensors. You can also control the gap between neighboring sensors.

Options/Controls

  • Number of Segments - the number of segments comprising the sensor pattern (minimum of 3).
  • Slider Segment Width - the width of each sensor segment (between 2mm and 8mm).
  • Slider Segment Height - the height of each sensor segment (between 7mm and 15mm).
  • Clearance Between Segments - the clearance, or gap, between neighboring sensor segments (between 0.5mm and 2mm).

RadialSlider


CapSense Component dialog - RadialSlider sensor type.

Use the RadialSlider component to implement an n-segment radial slider sensor. This is a self-capacitance, one-dimensional sensor for connection directly to a Cypress PSoC controller (each segment in the pattern connects to a separate pin of the Controller). The resulting sensor pattern on the PCB is comprised of n wedge-shaped electrodes, where n is the number of segments specified. In essence, you are specifying n separate sensors placed physically adjacent to each other in radial fashion. You have global control over the inner and outer diameter of the slider, and the clearance between neighboring segments.

Options/Controls

  • Number of Segments - the number of segments comprising the sensor pattern (minimum of 3).
  • Slider Outer Diameter - the outer diameter for the sensor pattern.
  • Slider Inner Diameter - the inner diameter for the sensor pattern.
The effective segment height should not be less than 7mm, and the effective segment width should not be greater than 8mm. In addition, the inner diamater must be less than the outer diameter.
  • Clearance Between Segments - the clearance, or gap, between neighboring sensor segments (between 0.5mm and 2mm).

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。