Published on Online Documentation for Altium Products (https://www.altium.com/documentation)

KB: Show copper and soldermask in Fusion 360 MCAD

Created: November 11, 2024 | Updated: November 20, 2024

Solution Details

Those entities are represented as Sketches in the Board Part. You can simply make them visible and then, if you want, you can build an extrude or an extruded surface based on those sketches.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Source URL: https://www.altium.com/documentation/knowledge-base/altium-designer/show-copper-and-soldermask-in-fusion-360-mcad