Applied Parameters: CommandMode=CAM
Summary
This command is used to place polygon objects onto the current document. A polygon is a raster filled boundary that requires an outline to be made of straight lines.
Access
This command is accessed from the CAMtastic Editor by choosing the Place ยป Polygon command from the main menus.
Use
After launching the command, you will enter polygon placement mode. Placement is made by performing the following sequence of actions:
- Position the cursor at the required location in the workspace and click to anchor the start point for the polygon.
- Move the cursor and click again to place the next vertex point in the polygon boundary.
- Continue placing further vertices, clicking each time, until the desired shape for the polygon has been achieved.
- Right-click to complete placement and fill the polygon. There is no need to "close" the polygon as the software will automatically complete the shape by adding a line from the start point to the final point placed.
- Continue placing further polygons, or press Esc to exit polygon placement mode.
Tips
- A polygon must have at least three distinct vertices.
- If you wish to place a polygon that clears all flashes and draws that fall within its boundary, place a polygon void object. A Polygon void behaves exactly the same as a polygon, but when placed, all contents within its boundary are cleared. You can put polygon voids inside a polygon.
- Polygons will be drawn using the current DCode. Set the required DCode in the DCode field on the CAMtastic panel.
- Polygons will be drawn on the current layer. The current layer is displayed on the CAMtastic panel at the top of the layers list. Double-clicking on any layer in the layers list will cause it to become the current layer.
