Undo

Created: June 21, 2017 | Updated: December 16, 2019 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Now reading version 20.0. For the latest, read: Undo for version 22

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Undo

Applied Parameters: None

Summary

This feature is used to restore the current document to its state previous to the last operation.

Access

This command can be accessed from the PCB Editor and the PCB Library Editor by:

Choosing the Edit » Undo command from the main menus.
Clicking the button on the Quick Access Bar.
Clicking the button on the PCB Standard toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor).
Using the Ctrl+Z keyboard shortcut.

Multiple levels of Undo are supported by clicking the command repeatedly.

The command only becomes available provided a change to the document has been made.

Use

After launching the command, the last operation will be 'undone' and the document will be returned to its previous state. Use the command repeatedly to undo more operations.

Tips

A command that has been 'undone' using this command can be 'redone' using the Redo command.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.