WSM API System Interfaces
Parent page: Technical Reference - Workspace Manager API
Workspace Manager API: System Interfaces
The Workspace Manager API System Interfaces reference includes the following sections and content:
System Interfaces
IChangeManager interface
Overview
The IChangeManager interface represents the change manager where you can execute an ECO of pins to be swapped for the target component of the target document.
Interface Methods
Procedure DM_SetProject1(AProject : IProject);
Procedure DM_SetProject2(AProject : IProject);
Function DM_ExecuteChanges(IsSilent : LongBool) : LongBool;
Procedure DM_CreateECO_SwapPin (TargetDocument : IDocument;
TargetComponent: IComponent;
TargetPin : IPin;
NewPinNumber : WideString;
OldPinNet : WideString;
NewPinNet : WideString);
See also
Workspace Manager Interfaces
IDocument interface
IComponent interface
IPin interface
IComponentMappings interface
Overview
The IComponentMappings interface represents the mapping of source components and target components in schematic and PCB documents.
Interface Methods
| Method | Description |
| Function DM_UnmatchedSourceComponent(Index : Integer) : IComponent; | Returns the indexed unmatched source component, that is, a target component could not be found to map to this source component. Use the DM_UnmatchedSourceComponentCount function. |
| Function DM_UnmatchedTargetComponent(Index : Integer) : IComponent; | Returns the indexed unmatched target component, that is, a source component could not be found to map to the target component. Use the DM_UnmatchedTargetComponentCount function. |
| Function DM_MatchedSourceComponent (Index : Integer) : IComponent; | Returns the indexed matched source component (that has been matched with a target component). Use the DM_MatchedSourceComponentCount function. |
| Function DM_MatchedTargetComponent (Index : Integer) : IComponent; | Returns the indexed matched source component (that has been matched with a target component). Use the DM_MatchedTargetComponentCount function. |
| Function DM_UnmatchedSourceComponentCount : Integer; | Returns the number of unmatched source components. |
| Function DM_UnmatchedTargetComponentCount : Integer; | Returns the number of unmatched target components. |
| Function DM_MatchedComponentCount: Integer; | Returns the number of matched components. |
ICustomClipboardFormat interface
Overview
Interface Methods
Function RegisterCustomClipboardFormat(Const AFormatName : WideString) : Longword;
See also
Workspace Manager Interfaces
IDoToManager
Overview
The IDoToManager interface represents the To Do panel in Altium Designer. This To Do list manager allows you to manage a list of what to do and assign a priority to each what to do item.
Interface Methods
Function AddItem (Const AnItem : WideString) : LongBool;
Function RemoveItem (Const AnItem : WideString) : LongBool;
Function GetItem ( Index : Integer ) : WideString;
Function GetCount : Integer;
Procedure Clear;
Interface Properties
Property Item[Index : Integer] : WideString Read GetItem;
Property Count : Integer Read GetCount;
See also
Workspace Manager Interfaces
IDocumentBackups interface
Overview
Interface Properties
Property Count : Integer
Property Backups[AIndex : Integer] : WideString
See also
IClient interface
IECO interface
Overview
The IECO interface represents an Engineering Change Order interface in the Work Space Manager. Basically an Engineering Change Order attempts to keep a project containing source documents and its corresponding primary implementation documents synchronized. For example a schematic project and its PCB document, every time something changes in a schematic project, it is necessary to bring the changes forward to the PCB document via the Engineering Change Order feature.
Interface Methods
| Method | Description |
| Procedure DM_Begin; | Denotes that the ECO manager has started. |
| Procedure DM_End; | Denotes that the ECO manager has ended. |
| Function DM_AddObject (Mode : TECO_Mode; ReferenceObject : IDMObject) | Adds a reference object for the ECO to compare the target document against this reference document. |
| Function DM_RemoveObject (Mode : TECO_Mode; ObjectToRemove : IDMObject) | Removes a reference object depending on what ECO mode is. |
| Function DM_AddMemberToObject (Mode : TECO_Mode; ReferenceMember : IDMObject; ReferenceParent : IDMObject; TargetParent : IDMObject) |
Adds a specific action in the ECO manager. |
| Function DM_RemoveMemberFromObject (Mode : TECO_Mode; MemberObject : IDMObject; ParentObject : IDMObject) |
Removes a specific action in the ECO manager. |
| Function DM_ChangeObject (Mode : TECO_Mode; Kind : TModificationKind; ObjectToChange : IDMObject; ReferenceObject : IDMObject) |
Changes a specific action in the ECO manager. |
IMessagesManager
Overview
The IMessagesManager interface represents the Messages panel in Altium Designer.
IMessagesManager interface table
| IMessagesManager methods AddMessage AddMessageParametric ClearMessages ClearMessagesOfClass ClearMessagesForDocument ClearMessageByIndex BeginUpdate EndUpdate MessagesCount Messages |
IMessagesManager properties |
Example
//Populating the Message Panel using the Workspace manager’s functionality
Procedure InsertMessagesIntoMessagePanel;
Var
WSM : IWorkSpace;
MM : IMessagesManager;
ImageIndex : Integer;
F : Boolean;
Begin
WSM := GetWorkSpace;
If WSM = Nil Then Exit;
// Tick icon for the lines in the Message panel
// Refer to the Image Index table in the
// Workspace Manager API reference online help.
ImageIndex := 3;
MM := WSM.DM_MessagesManager;
If MM = Nil Then Exit;
// Clear out messages from the Message panel...
MM.ClearMessages;
WSM.DM_ShowMessageView;
MM.BeginUpdate;
F := False;
MM.AddMessage({MessageClass } 'MessageClass 1',
{MessageText } 'MessageText 1',
{MessageSource } 'Altium Designer Message',
{MessageDocument } 'Pseudo Doc 1',
{MessageCallBackProcess } '',
{MessageCallBackParameters} '',
ImageIndex,
F);
MM.AddMessage({MessageClass } 'MessageClass 2',
{MessageText } 'MessageText 2',
{MessageSource } 'Altium Designer Message 2',
{MessageDocument } 'Pseudo Doc 2',
{MessageCallBackProcess } '',
{MessageCallBackParameters} '',
ImageIndex,
F);
MM.EndUpdate;
End;
See also
Image Index Table
Methods
AddMessage method
(IMessagesManager interface)
Syntax
Procedure AddMessage
(Const MessageClass,
MessageText,
MessageSource,
MessageDocument,
MessageCallBackProcess,
MessageCallBackParameters : WideString;
ImageIndex : Integer;
ReplaceLastMessageIfSameClass : Boolean = False;
MessageCallBackProcess2 : WideString = '';
MessageCallBackParameters2 : WideString = '');
Description
This method gives you the ability to access an Altium Designer Message on the Message panel:
- MessageClass - which sort of message it belongs to. (User defined)
- MessageText - the message text to appears in the Message panel.
- MessageSource - could be one of the following pre-defined strings such as : Comparator, Back-Annotate, Output Generator, Compiler or you can define your own MessageSource string.
- MessageDocument - Owner Document name – normally a full path name of the document that the Message is associated with.
- MessageCallBackProcess - process name to call back.
- MessageCallbackParameters - parameters for the CallBackProcess.
- ImageIndex - the index to the image depending on which Message Class. Refer to the Image Index Table topic to check out the appropriate image for each message.
- ReplaceLastMessageIfSameClass - (defaults to false).
- MessageCallBackProcess2
- MessageCallBackParameters2
Example
See also
IMessagesManager Interfaces
AddMessageParametric method
(IMessagesManager interface)
Syntax
Procedure AddMessageParametric(MessageParams : PChar;MessageCallBackParameters : PChar);
Description
Inserts a Altium Designer message in the Message panel. Similar to the DM_AddMessage only that you define the Name / Value blocks in the MessageParams nullterminated string:
- Class – Back-Annotate class, Error level, Differences.
- Text - text displayed in the Message panel.
- Source - could be one of the following: Comparator, Back-Annotate, Output Generator, Compiler,.
- Document - Owner Document name
- CallBackProcess - process name to call back.
- UserId - Unique ID
- HelpFileName - Name of the Help file
- HelpTopic - specific help topic string
- ImageIndex - the index to the image depending on which Message Class.
- 'ReplaceLastMessageIfSameClass - Boolean. If Same MessageClass, specify whether this class is to be overridden or not by the current message class information.
- MessageCallBackParameters – parameters for the CallBackProcess.
Example
See also
IMessagesManager
BeginUpdate method
(IMessagesManager interface)
Syntax
Procedure BeginUpdate;
Description
Invoke this method before you wish to add Messages (DM_AddMessage or DM_AddMessageParameteric methods) to the Message panel.
Example
See also
IMessagesManager
ClearMessageByIndex method
(IMessagesManager interface)
Syntax
Procedure ClearMessageByIndex ( AIndex : Integer );
Description
Example
See also
IMessagesManager
ClearMessages method
(IMessagesManager interface)
Syntax
Procedure ClearMessages;
Description
Clears out the Messages panel.
Example
See also
IMessagesManager
ClearMessagesForDocument method
(IMessagesManager interface)
Syntax
Procedure ClearMessagesForDocument(Const DocumentPath : WideString);
Description
Example
See also
IMessagesManager
ClearMessagesOfClass method
(IMessagesManager interface)
Syntax
Procedure ClearMessagesOfClass (Const AMsgClass : WideString);
Description
This method gives you the ability to clear messages of the same class type. Various class types include Back-Annotate class, Error level, Differences
Example
See also
IMessagesManager
EndUpdate method
(IMessagesManager interface)
Syntax
Procedure EndUpdate;
Description
Invoke this method after you have added Messages to the Message panel.
Example
See also
IMessagesManager
Messages method
(IMessagesManager interface)
Syntax
Function Messages(Index : Integer) : IMessageItem;
Description
Example
See also
IMessagesManager
MessagesCount method
(IMessagesManager interface)
Syntax
Function MessagesCount : Integer;
Description
Example
See also
IMessagesManager
IMessageItem interface
Overview
The Message Manager interface has messages if any on the messages panel. Each message item is represented by the IMessageItem interface.
IMessageItem Properties
Property MsgClass : WideString
Property Text : WideString
Property Source : WideString
Property Document : WideString
Property MsgDateTime : TDateTime
Property ImageIndex : Integer
Property UserId : WideString
Property CallBackProcess : WideString
Property CallBackParameters : WideString
Property CallBackProcess2 : WideString
Property CallBackParameters2 : WideString
Property HelpFileName : WideString
Property HelpFileID : WideString
Property MsgIndex : Integer
See also
IMessagesManager Interfaces
ISearchPath interface
Overview
The ISearchPath interface represents the paths of a project. This ISearchPath interface has a link to the associated open project in Altium Designer.
Interface Methods
| Method | Description |
| Function DM_Path : WideString; | Returns the path of the focussed project in Altium Designer. |
| Function DM_AbsolutePath : WideString; | Returns the absolute path of the focussed project in Altium Designer. |
| Function DM_IncludeSubFolders : Boolean; | Returns whether sub folders are included in the focussed project in Altium Designer. |
| Function DM_Project : IProject; | Returns the project in which this ISearchPath interface is associated with. |
ISymbolGenerator
Overview
The ISymbolGenerator interface represents the symbol with parameters added if necessary generated by the ICoreProject interface.
Important Notes
ICoreProject interface's DM_CreateSymbolGenerator method returns a ISymbolGenerator interface.
Interface Methods
Procedure DM_ClearParameters;
Procedure DM_AddParameter(Name, Value : WideString);
Procedure DM_GenerateComponent;
See also
Workspace Manager Interfaces
ICoreProject interface
IVCSProjectAccessor interface
Overview
Interface methods
Function ObjectAddress : IInterface;
See also
IClient interface
IExternalForm interface
IVersionControlServer interface
Overview
Interface methods
Function GetStatusString (Const AObject : IDMObject) : WideString;
See also
Workspace Manager Interfaces
IVhdlEntity interface
Overview
The IVhdlEntity interface represents the existing VHDL entity object on a VHDL document. Basically a VHDL document can contain many VHDL entities and each entity corresponds to a schematic document.
Since every object interface (inherited from the IDMObject interface) has a DM_VHDLEntity method. This method can be useful in cases such as determining which ports correspond to VHDL entities.
Interface Methods
| Method | Description |
| Function DM_Name : WideString; | Returns the name of the VHDL entity. |
IWorkspacePreferences
Overview
The IWorkspacePreferences interface represents the Preferences object in Altium Designer This interface details with file ownership - that is the rights of access to a design document.
Interface Methods
Function GetDefaultTemplateFile(Const ADocKind : Widestring) : Widestring;
Function GetFileOwnership_Enabled : Boolean;
Function GetFileOwnership_EnabledOutputDirectory : Boolean;
Function GetFileOwnership_WarningLevelOpen : TFileOwnershipWarningLevel;
Function GetFileOwnership_WarningLevelSave : TFileOwnershipWarningLevel;
Function GetDefaultLibraryPath : WideString;
Function GetHighlightMethodSet : THighlightMethodSet;
Function GetObjectsToDisplay : TWorkspaceObjectIdSet;
Function GetHighlightConnectedPowerParts : Boolean;
Procedure SetDefaultTemplateFile(Const ADocKind, AFileName : Widestring);
Procedure SetFileOwnership_Enabled(AValue : Boolean);
Procedure SetFileOwnership_EnabledOutputDirectory(AValue : Boolean);
Procedure SetFileOwnership_WarningLevelOpen(AValue : TFileOwnershipWarningLevel);
Procedure SetFileOwnership_WarningLevelSave(AValue : TFileOwnershipWarningLevel);
Interface Properties
Property DefaultTemplateFile[Const ADocKind : Widestring] : Widestring
Property FileOwnership_Enabled : Boolean
Property FileOwnership_EnabledOutputDirectory : Boolean
Property FileOwnership_WarningLevelOpen : TFileOwnershipWarningLevel
Property FileOwnership_WarningLevelSave : TFileOwnershipWarningLevel
Property DefaultLibraryPath : WideString
See also
Workspace Manager Interfaces
Configuration Constraints Interfaces
IConfiguration interface
Overview
The IConfiguration interface represents the configuration container that contains a group of constraints which targets a specific FPGA device.
Interface Methods
Function DM_Name : WideString;
Function DM_ConstraintGroupCount : Integer;
Function DM_ConstraintGroups(Index : Integer) : IConstraintGroup;
Function DM_ConstraintsFileCount : Integer;
Function DM_ConstraintsFilePath(Index : Integer) : WideString;
Procedure DM_AddConstraintFile(AConstraintFilePath : WideString);
Function DM_GetTargetDeviceName : WideString;
See also
Workspace Manager Interfaces
IConstraintGroup interface
Overview
The IConstraintGroup interface represents a constraint file made up of constraints (as IConstraint interface).
Important notes
Inherited from IDMObject interface
Interface Methods
Function DM_TargetKindString : WideString;
Function DM_TargetId : WideString;
Function DM_ConstraintCount : Integer;
Function DM_Constraints(Index : Integer) : IConstraint;
See also
Workspace Manager Interfaces
IConstraint interface
IConstraint interface
Overview
The IConstraint interface represents the data entry in a constraint file represented by the IConstraintGroup interface.
Important notes
Inherited from IDMObject interface
Interface Methods
Function DM_Kind : WideString;
Function DM_Data : WideString;
See also
Workspace Manager Interfaces
IConstraintGroup interface
IInstalledConstraintFiles interface
Overview
The IInstalledConstraintFiles interface represents the constraint files that are installed in Altium Designer, ie available to a FPGA project.
Interface Methods
Function InstalledConstraintFileCount : Integer;
Function InstalledConstraintFile (aIndex : Integer) : WideString;
Function ConstraintFileIsInstalled (aPath : WideString) : LongBool;
Function DefaultConstraintFile : WideString;
Function EditInstalledConstraintFiles : LongBool;
See also
Workspace Manager Interfaces
IOutputer interface
Overview
The IOutputer interface represents the one of the outputs of an output job within a design project.
Interface Methods
Function DM_ViewName : WideString
Function DM_EditProperties : Boolean;
Function DM_Generate_OutputFilesTo (OutputDirectory : WideString; ParameterOverrides : PChar) : Boolean;
Function DM_Generate_OutputFiles (AGeneratedFilename : PChar) : Boolean;
Procedure DM_SetPrintScale (APrintScale : Double);
Procedure DM_SetPrintMode (AFitPrintToPage : Boolean);
Procedure DM_SetDocumentPath (ADocPath : WideString);
See also
Workspace Manager Interfaces
IProject interface
IOutputJob interface
IWSM_OutputJobDocument interface
IStrings interface
Overview
The IStrings interface represents the strings container – more like a list of strings.
Interface Methods
Function GetCount : Integer;
Function GetItem(Index : Integer) : WideString;
Function IndexOf(Const Value : WideString) : Integer;
Interface Properties
Property Count : Integer read GetCount;
Property Items[Index : Integer] : WideString read GetItem; default;
See also
Workspace Manager Interfaces
IWSM_OutputJobDocument interface
Overview
The IWSM_OutputJobDocument interface represents the output jobs document in Altium Designer.
Interface Methods
Function GetState_Outputer (AIndex : Integer) : IOutputer;
Function GetState_OutputerCount : Integer;
Function CreateOutputer (Const AOutputCategoryName : WideString;
Const APredefinedOutputName : WideString;
Const AOutputerName : WideString) : IOutputer;
Function BeginModifyOutputer (Const AOutputer : IOutputer ) : Boolean;
Procedure EndModifyOutputer;
Interface Properties
Property Outputer [AIndex : Integer] : IOutputer Read GetState_Outputer;
Property OutputerCount : Integer Read GetState_OutputerCount;
See also
Workspace Manager Interfaces
IProject interface
IOutputJob interface
IWSM_OutputJobDocument interface
IWSM_ServerInterface interface
Overview
The IWSM_ServerInterface interface represents the high level mechanism that manages different output job documents.
Interface Methods
Function GetOutputJobDocumentByPath (APath : WideString) : IWSM_OutputJobDocument;
Interface Properties
See also
Workspace Manager Interfaces
IProject interface
IOutputJob interface
IWSM_OutputJobDocument interface
IDifferentialPair interface
Overview
The IDifferentialPair interface represents a differential pair object.
Interface Methods
IObjectClass methods
Interface Properties
IObjectClass properties
See also
Workspace Manager Interfaces
IDatabaseLibDocument interface
Overview
The IDatabaseLibDocument interface represents a database library document.
Interface Methods
Procedure GetModelFieldNamesAt(AnIndex : Integer;
ATableIndex : Integer;
AModelType : WideString;
Var AModelPathName : WideString;
Var AModelRefName : WideString;
Var AOrcadModel : Boolean);
Procedure InitialiseExportToDatabase (ADatabaseFileName : WideString);
Procedure FinaliseExportFromDatabase;
Procedure DisposeIfNotShowing;
Procedure GetOrcadLibraryDetails (AParseString : WideString;
Var LibRef : WideString;
Var LibPath : WideString);
Function ExportNewRecordFromIntLib (ATableName : WideString;
AFieldParameters : WideString) : WideString;
Function InitialiseExportFromIntLib (ATableName : WideString) : WideString;
Function GetConnectionString : WideString;
Function GetCommandString(ATableIndex : Integer;
AFilterText : WideString;
ASQLWhereClause : WideString) : WideString;
Function GetFilterText (ATableIndex : Integer;
AFilterColumnNames : WideString;
AFilterValue : WideString) : WideString;
Function GetParametersForComponent (ATableIndex : Integer;
AComponentKeys : WideString) : WideString;
Function GetTableCount : Integer;
Function GetFileName : Widestring;
Function GetKeyFieldCount(ATableIndex : Integer) : Integer;
Function GetKeyField (AParameterName : Boolean;
ATableIndex : Integer;
AKeyIndex : Integer) : WideString;
Function GetLibraryRefFieldName(ATableIndex : Integer;
Var AOrcadLibrary : Boolean) : WideString;
Function GetLibraryPathFieldName(ATableIndex : Integer) : WideString;
Function GetFieldCount (ATableIndex : Integer) : Integer;
Function GetTableNameAt (AnIndex : Integer) : WideString;
Function GetFieldNameAt (ATableIndex : Integer;
AFieldIndex : Integer) : WideString;
Function GetTableIndex (ATableName : WideString) : Integer;
Function TableEnabled (AnIndex : Integer) : Boolean;
Function DocumentObject : Pointer;
Function GetItemCount( ACommand : WideString;
Var AnError : WideString) : Integer;
Function TableContainsColumn(ATableIndex : Integer;
AColumnName : WideString) : Boolean;
Function IsValidSQLStatementForTable (ATableName : WideString;
AQuery : WideString) : Boolean;
Function LoadAllRecordsLimit : Integer;
Function ValidateSQLQuery (ASqlQuery : WideString) : WideString;
Function GetDatafilePath (AName : WideString;
AType : WideString;
ATableName : WideString;
AComponentKeys : WideString) : WideString;
Function GetSchLibPathForComponent (ATableIndex : Integer;
AComponentKeys : WideString) : WideString;
Function GetSchLibRefForComponent(ATableIndex : Integer;
AComponentKeys : WideString) : WideString;
Function IsParameterDatabaseKey(ATableIndex : Integer;
AParameterName : WideString) : Boolean;
Function ObjectAddress : Pointer;
Function GetLibrarySearchPath : WideString;
Function GetSearchSubDirectories : Boolean;
Function OrcadDelimiter : Char;
Interface Properties
IObjectClass properties
See also
Workspace Manager Interfaces
Signals Manager interfaces
IEntityPort interface
Overview
Important notes
· Inherited from ISignalNode interface
Interface Methods
· All methods from ISignalNode interface.
See also
Workspace Manager Interfaces
ISignalManager interface
ISignalNode interface
IExternalParameter interface
Overview
The IExternalParameter interface defines the external parameter object.
Interface Methods
| Method | Description |
| Function DM_GetSection : WideString; | Returns the Section string of the external parameter interface. |
| Function DM_GetName : WideString; | Returns the Name string of the external parameter interface. |
| Function DM_GetValue : WideString; | Returns the Value string of the external parameter interface. |
| Procedure DM_SetValue(AValue : WideString); | Sets the new value string for this external parameter. |
IInstance interface
Overview
Interface Methods
Function DM_Part : IPart;
Function DM_SheetSymbol : ISheetSymbol;
Function DM_Ports (Index : Integer) : IInstancePort;
Function DM_PortCount : Integer;
Function DM_Designator : WideString;
Function DM_InstanceType : WideString;
See also
Workspace Manager Interfaces
ISignalManager interface
IPart interface
ISheetSymbol interface
IInstancePort interface
IInstancePort interface
Overview
Important notes
· Inherited from ISignalNode interface
Interface Methods
· All methods from ISignalNode interface.
See also
Workspace Manager Interfaces
ISignalManager interface
ISignalNode interface
ISignal interface
Overview
Interface Methods
Function DM_Namers (Index : Integer) : ISignalNode;
Function DM_SubNets (Index : Integer) : ISubNet;
Function DM_DriverLinks(Index : Integer) : ISignalLink;
Function DM_TargetLinks(Index : Integer) : ISignalLink;
Function DM_NamerCount : Integer;
Function DM_SubNetCount : Integer;
Function DM_DriverLinkCount : Integer;
Function DM_TargetLinkCount : Integer;
Function DM_DriverBits (BitNo,Index : Integer) : ISignalNode;
Function DM_TargetBits (BitNo,Index : Integer) : ISignalNode;
Function DM_DriverBitCount(BitNo : Integer) : Integer;
Function DM_TargetBitCount(BitNo : Integer) : Integer;
Function DM_Prefix : WideString;
Function DM_Range1 : WideString;
Function DM_Range2 : WideString;
Function DM_RangeValue1 : Integer;
Function DM_RangeValue2 : Integer;
Function DM_BusKind : TBusKind;
Function DM_Width : Integer;
Function DM_RangeMax : Integer;
Function DM_RangeMin : Integer;
Function DM_PrimaryNode : ISignalNode;
Function DM_PowerNode : ISignalNode;
Function DM_PowerName : WideString;
See also
Workspace Manager Interfaces
ISignalManager interface
ISignalNode interface
ISubNet interface
ISignalLink interface
TBusKind interface
ISignalLink
Overview
Interface Methods
Function DM_DriverNode : ISignalNode;
Function DM_TargetNode : ISignalNode;
Function DM_DriverSignal : ISignal;
Function DM_DriverNodeRange1 : WideString;
Function DM_DriverNodeRange2 : WideString;
Function DM_DriverNodeRangeValue1 : Integer;
Function DM_DriverNodeRangeValue2 : Integer;
Function DM_TargetSignal : ISignal;
Function DM_TargetNodeRange1 : WideString;
Function DM_TargetNodeRange2 : WideString;
Function DM_TargetNodeRangeValue1 : Integer;
Function DM_TargetNodeRangeValue2 : Integer;
Function DM_DriverRangeMax : Integer;
Function DM_DriverRangeMin : Integer;
Function DM_TargetRangeMax : Integer;
Function DM_TargetRangeMin : Integer;
See also
Workspace Manager Interfaces
ISignalManager interface
ISignal interface
ISignalNode interface
ISignalManager interface
Overview
Interface Methods
Function DM_SubNets (Index : Integer) : ISubNet;
Function DM_Instances (Index : Integer) : IInstance;
Function DM_InstanceKinds (Index : Integer) : IInstance;
Function DM_Signals (Index : Integer) : ISignal;
Function DM_EntityPorts (Index : Integer) : IEntityPort;
Function DM_SubNetCount : Integer;
Function DM_InstanceCount : Integer;
Function DM_InstanceKindCount : Integer;
Function DM_SignalCount : Integer;
Function DM_EntityPortCount : Integer;
See also
Workspace Manager Interfaces
ISubNet interface
IInstance interface
ISignal interface
IEntityPort interface
ISignalNode
Overview
Interface Methods
Function DM_NetItem : INetItem;
Function DM_SubNet : ISubNet;
Function DM_GetDescription : WideString;
Function DM_GetName : WideString;
Function DM_Direction : TSignalDirection;
Function DM_IsDriver : LongBool;
Function DM_Range1 : WideString;
Function DM_Range2 : WideString;
Function DM_RangeValue1 : Integer;
Function DM_RangeValue2 : Integer;
Function DM_RangeMax : Integer;
Function DM_RangeMin : Integer;
Function DM_BusIndex : Integer;
Function DM_Width : Integer;
Function DM_TargetLinks (Index : Integer) : ISignalLink;
Function DM_DriverLinks (Index : Integer) : ISignalLink;
Function DM_TargetLinkCount : Integer;
Function DM_DriverLinkCount : Integer;
Function DM_Signal : ISignal;
Function DM_EntityPort : IEntityPort;
Function DM_ConstantExpression : WideString;
See also
Workspace Manager Interfaces
ISignalManager interface
ISignal interface
ISignalLink interface
IEntityPort interface
TSignalDirection interface
ISubNet interface
Overview
Interface Methods
Function DM_Lines (Index : Integer) : ILine;
Function DM_SignalLinks (Index : Integer) : ISignalLink;
Function DM_Signals (Index : Integer) : ISignal;
Function DM_Nodes (Index : Integer) : ISignalNode;
Function DM_PinNodes (Index : Integer) : ISignalNode;
Function DM_PowerObjectNodes (Index : Integer) : ISignalNode;
Function DM_PortNodes (Index : Integer) : ISignalNode;
Function DM_NetLabelNodes (Index : Integer) : ISignalNode;
Function DM_SheetEntryNodes (Index : Integer) : ISignalNode;
Function DM_CrossSheetNodes (Index : Integer) : ISignalNode;
Function DM_LineCount : Integer;
Function DM_SignalLinkCount : Integer;
Function DM_SignalCount : Integer;
Function DM_NodeCount : Integer;
Function DM_PinNodeCount : Integer;
Function DM_PowerObjectNodeCount : Integer;
Function DM_PortNodeCount : Integer;
Function DM_NetLabelNodeCount : Integer;
Function DM_SheetEntryNodeCount : Integer;
Function DM_CrossSheetNodeCount : Integer;
Function DM_Net : INet;
See also
Workspace Manager Interfaces
ISignalManager interface
ISignal interface
ISignalNode interface
ISignalLink interface
ILine interface
INet interface