Altium Designer Documentation
...
Dialog Reference
A to F
Custom Revision ID
Created: July 14, 2020 | Updated: July 15, 2020
| Applies to versions: 20.0, 20.1 and 20.2
Now reading version 20.2. For the latest, read: Custom Revision ID for version 21
The Custom Revision ID dialog
Summary
The Custom Revision ID dialog allows you to manually specify the revision of the target item into which the generated data will be released.
Access
The dialog is accessed in the Configure Server Release stage (Stage 1) of the Project Releaser (Project » Project Releaser) by clicking on the Target Revision link then choose Custom from the drop-down menu.
Options/Controls
Depending on the level revision naming scheme employed, there may be up to three Level ID types.
- Level 2 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
- Level 1 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
- Level 0 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.