Bezier Properties

Created: April 08, 2021 | Updated: April 08, 2021 | Applies to version: 21

Now reading version 22.0. For the latest, read: Bezier Properties for version 21

Parent page: Bezier

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

Pre-placement settings – most Bezier object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.

Post-placement settings – all Bezier object properties are available for editing in Bezier dialog the Properties panel when a placed Bezier is selected in the design space.

If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic - Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open.

While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly.

In the below options listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Properties

Curve Width - use the drop-down to select the desired curve width.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Bezier Properties

Properties

Was this page helpful?