Radial Dimension

Now reading version 20.1. For the latest, read: Radial Dimension for version 21
 

Parent page: PCB Objects

A placed Radial Dimension.A placed Radial Dimension.

Summary

A radial dimension is a group design object. It allows for the dimensioning of a radius with respect to an arc or circle. The dimension can be placed either internally or externally, in relation to the circumference of the arc/circle.

Availability

Radial dimension objects are available for placement in the PCB Editor only. Use one of the following methods to access a placement command:

For a grouped set of Active Bar commands (indicated by a triangle at the bottom-right corner of the button), the button displays the last-used command. Click and hold on the active button to access a menu of all associated commands for that grouping.

  • Click the  button on the Place Dimension drop-down () of the Utilities toolbar.
  • Right-click in the workspace then choose the Place » Dimension » Radial command from the context menu.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter dimension placement mode. Placement is made by performing the following sequence of actions:

  1. Position the cursor then click or press Enter to anchor the dimension to the desired arc or circle.
  2. Move the dimension's arrow pointer to the desired location around the arc or circle. The arrow can be placed either inside or outside and movement is in accordance with the Angular Step value in the Radial Dimension mode of the Properties panel. When the required position has been attained, click or press Enter to lock the arrow in place.
  3. The text can now be initially positioned in relation to the tail of the arrow pointer. Move the text into the required position then click or press Enter to complete placement.
  4. Continue placing further radial dimensions or right-click or press Esc to exit dimension placement mode.

When dimensioning an object, anchor points become available to you that highlight where the dimension can be attached. The point nearest the cursor will be the one used and where the dimension will attach if you proceed to click or press Enter.

The Status bar displays information about the actions needed for each step throughout the process.

At any time during placement, press the Tab key to access the Properties panel from where properties for the dimension can be changed on-the-fly. Pressing Tab pauses placement, allowing you to interact with the panel (or other area of the software) directly. To resume, click the pause symbol that appears over the workspace or press Esc.

Additional actions that can be performed during placement are:

  • Press the + and - keys (on the numeric keypad) to cycle forward and backward through all visible layers in the design to change placement layer quickly. Alternatively, use the Ctrl+Wheelroll shortcut to cycle through the available layers.

While attributes can be modified during placement (Tab to open the Properties panel), keep in mind that these will become the default settings for further placement unless the Permanent option on the PCB Editor – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed radial dimension object directly in the workspace and graphically change properties such as the position of its text, the location of its arrow pointer and its reference point.

When a radial dimension object is selected, the following editing handles are available:

 A selected Radial Dimension A selected Radial Dimension

  • Click & drag A to adjust the dimension text position relative to the 'tail' of the arrow pointer.
  • Click & drag B to adjust the position of the arrow pointer around the circumference of the circle or arc.
  • Click & drag C to move the start point of the dimension.

Handle C allows you to redefine the reference; once the dimension is detached from a reference object it becomes non-referenced and can be moved for attachment to a different reference object.

If the dimension text is placed within the circumference of the arc or circle, only two of the three editing handles will be available for use – A and C. Editing handle A will assume the additional role of editing handle B.

  1. A dimension object can be moved in the following ways:
    1. Selecting both the dimension object and the objects that are being dimensioned. The whole can be dragged to a new location as required.
    2. Selecting an object that is being dimensioned only. The dimension text will follow the object in its alignment plane only. The dimension extensions will expand/contract to keep the relationship between dimension and object being dimensioned.
    3. Selecting the dimension object only. It is important to note that the dimension cannot be moved on its own if it is referenced by a design object. To move the dimension only, it must first be detached from the objects it is dimensioning.
  2. The dimension's value automatically updates as the radius of the reference arc or circle changes.
  3. If the dimension object is totally non-referenced (i.e. it is not attached to any reference design objects) click anywhere on it away from editing handles then drag to reposition it. While dragging, the dimension can be rotated or mirrored:
    1. Press the Spacebar to rotate the dimension counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
    2. Press the X or Y keys to mirror the radial dimension along the X-axis or Y-axis.

If attempting to graphically modify an object that has its Locked property enabled ( button in the Properties panel), a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the PCB Editor – General page of the Preferences dialog and the Locked option for that design object is enabled as well, that object cannot be selected or graphically edited. Click the locked object to select it then disable the Locked property in the List panel or disable the Protect Locked Objects option to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Via the Radial Dimension Dialog or Properties Panel

Properties page: Radial Dimension Properties

This method of editing uses the associated Radial Dimension dialog mode and Properties panel to modify the properties of a Radial Dimension object. 

The Radial Dimension dialog on the left and the Radial Dimension mode of the Properties panel on the right   The Radial Dimension dialog on the left and the Radial Dimension mode of the Properties panel on the right 

During placement, the Radial Dimension mode of the Properties panel can be accessed by pressing the Tab key. Once the Radial Dimension is placed, all options appear.

After placement, the Radial Dimension dialog can be accessed by:

  • Double-clicking on the placed Radial Dimension object.
  • Placing the cursor over the Radial Dimension object, right-clicking then choosing Properties from the context menu.

After placement, the Radial Dimension mode of the Properties panel can be accessed in one of the following ways:

  • If the Properties panel is already active, by selecting the Radial Dimension object.
  • After selecting the Radial Dimension object, select the Properties panel from the Panels button in the bottom right section of the workspace, or by selecting View » Panels » Properties from the main menu.
If the Double Click Runs Interactive Properties option is disabled (default) on the PCB Editor - General page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 
Press Ctrl+Q to toggle the units of measurement currently used in the panel between metric (mm) and imperial (mil). This only affects the display of measurements in the panel; it does not change the measurement unit specified for the board, which is configured in the Units setting in the Properties panel when there are no objects selected in the editing workspace.

Editing via the PCB List Panel

Panel page: PCB List, PCB Filter

The PCB List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the PCB Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing you to target and edit multiple design objects with greater accuracy and efficiency.

Tips

  1. When the reference arc or circle to which a radial dimension object is attached is deleted, a dialog will open asking whether the dimension should also be deleted. If the dimension is not deleted, it remains in the workspace but non-referenced.
  2. Dimensions are group objects consisting of text and track segments. They can be converted to their set of primitive objects by choosing Tools » Convert » Explode Dimension to Free Primitives from the main menus. Once exploded, a dimension object can no longer be manipulated as a group object.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Content