Manufacturing - Acute Angle
Created: March 23, 2017 | Updated: September 26, 2019
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Now reading version 19.0. For the latest, read: Manufacturing - Acute Angle for version 21
Rule category: Manufacturing
Rule classification: Unary
Summary
This rule specifies the minimum angle permitted between any objects in the same net. The Acute Angle rule works on nets only. It finds all the acute angles created by any objects in one net. The rule essentially creates a contour from all the primitives in a net (on the same layer) and then analyzes this contour for any points that might create an angle smaller then the acute angle limit value.
Constraints
Default constraints for the Acute Angle rule.
- Minimum Angle - specifies the minimum permissible angle created between objects in the same net.
- Check Tracks Only - enable this option to force the DRC to check acute angles for track objects only.
How Duplicate Rule Contentions are Resolved
All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.
Rule Application
Online DRC and Batch DRC.