Merge Layer Stacks
Created: October 10, 2017 | Updated: February 05, 2018
| Applies to version: 18.0
Now reading version 21.0. For the latest, read: Merge Layer Stacks for version 18.1
The Merge Layer Stacks dialog
Summary
The Merge Layer Stacks dialog is used to control how the layers in the existing stack and the layers in the stack being loaded are to be used. The result will be the required final stack to be used for the board.
Access
In the Layer Stack Manager dialog (Design » Layer Stack Manager):
- Use the Load drop-down and select Load From File then select and open the desired *.stackup file.
- Use the Load drop-down and select Load from server then select the desired Layerstack Item from a server.
Options/Controls
- Create - specifies that an imported layer be used (checked) or not (unchecked).
- Layer Type - this displays the type of layer.
- New Layer - this is the layer stack being loaded/imported.
- Old Layer - this is the existing, current layer stack for the board.
- Used - a check denotes that layer currently has primitives placed on it in the board design.
- Action - shows what is to be done for the associated layer:
- Move Primitives - the layer being loaded will be used and existing primitives on the current layer will be moved to that layer.
- Add - this is not a layer in the current stack; it will be added to the stack.
- Skip - this is not a layer in the current stack; it will not be added to the stack.
- Skip & Delete - this layer exists in the current stack but is no longer required. Do not import the layer from file/server item and delete the existing layer from the stack.
- Delete - delete this layer.
- Default - click to revert to default settings. The default settings are:
- Map existing layers (those used in the board's current layer stack).
- Add new layers - found in the layer stack being loaded.
- Add all layers that are currently being used in the board design (i.e., have primitives placed upon them).
Right-click Menu
- Selected On - use to check the Create box of the layer in the current cursor location.
- Selected Off - use to uncheck the Create box of the layer in the current cursor location.
- Used On - use to set the current layer as used.
- Default - use to set all options to default settings.