Capacitors
![](/documentation/sites/default/files/wiki_attachments/296961/PCB_Component_Wizard_Capacitors1_AD18.png)
Use the drop-down to select the type of capacitor you want to design. Choose from Through Hole or Surface Mount.
![](/documentation/sites/default/files/wiki_attachments/296961/PCB_Component_Wizard_Capacitors2_AD18.png)
To change the pads' dimensions, click on the values and enter the new values.
This page will have a slightly different look if Surface Mount was selected, however, its functionality is the same.
![](/documentation/sites/default/files/wiki_attachments/296961/PCB_Component_Wizard_Capacitors3_AD18.png)
To change the pads positioning, click on the value and enter the new value.
This page will have a slightly different look if Surface Mount was selected, however, its functionality is the same.
![](/documentation/sites/default/files/wiki_attachments/296961/PCB_Component_Wizard_Capacitors4_AD18.png)
This page appears if Through Hole was selected. If Surface Mount was selected, the page below appears.
Use the drop-down to select the capacitor's polarity, either Not Polarised or Polarised. Use the drop-down to select the capacitor's mounting style, either Axial or Radial.
![](/documentation/sites/default/files/wiki_attachments/296961/PCB_Component_Wizard_Capacitors5_AD18.png)
This page appears if Surface Mount was selected.
Use the drop-down to select outline type, either Non polarised Outline or Polarised Outline.
![](/documentation/sites/default/files/wiki_attachments/296961/PCB_Component_Wizard_Capacitors6_AD18.png)
To change the outline dimensions, click on the values and enter the new values.
This page will have a slightly different look if Surface Mount was selected, however, its functionality is the same.