CAM Editor - DRC
Created: January 02, 2020 | Updated: June 08, 2020
| Applies to versions: 20.1 and 20.2
Now reading version 20.1. For the latest, read: CAM Editor - DRC for version 21
The CAM Editor - DRC page of the Preferences dialog.
Summary
The CAM Editor – DRC page of the Preferences dialog provides numerous controls relating to the general settings of the CAM Editor within the CAM design space.
Access
This page is part of the main Preferences dialog that is accessed by clicking the 
control in the upper-right corner of the workspace then selecting the DRC entry under the CAM Editor folder.
Options/Controls
Starved Thermals Clearance
- Clearance Value - use this field to set the minimum allowable distance between a thermal and another flash on a plane layer. This distance is specified as a percentage value from the thermal outer dimension.