Local Version Control Service

This document is no longer available beyond version 5.0. Information can now be found here: Local Version Control Service with Altium On-Prem Enterprise Server for version 7.0

This documentation page references Altium Concord Pro, which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

The Altium Concord Pro installation provides localized (and centralized) version control, courtesy of its Version Control service. This service provides version control possibilities right there where you need them, locally, without searching, or paying for, external VCS management software.

By defining design repositories in this centralized fashion, an organization can fully control which repositories its designers can access and use.

Relevance of the information on this page:

A new installation of Altium Concord Pro provides a single Git-based design repository for accommodating all of your managed design projects – and that's it! This avoids any setup and complexity regarding Concord Pro's local Version Control service. You have a single design repository – Versioned Storage – for all your designers to access and release into. As such, the VCS page of Concord Pro's browser interface becomes purely informational – you cannot add a new repository, and the single Git repository cannot be modified in any way, nor deleted. The information on this page therefore does not apply to you.

If you have upgraded to Altium Concord Pro from Altium Vault 3.0, then the use of SVN repositories will also be enabled, so that you can continue to use your previous (and established) design flow. In this case, you can continue to create repositories through the local Version Control service (SVN-only), or connect to external repositories (SVN or Git). The information on this page is therefore still relevant to you.

Important: Note that otherwise, the  button will be grayed out, and the ability to create/add repositories is unavailable.

See additional information.

For more information on Design Repositories, and working with them through Altium Designer, see Using External Version Control.

Key Advantages

There are two key advantages to using this centralized Version Control service:

  1. You have common users and rights management for both Altium Concord Pro and SVN. When you sign in to Altium Concord Pro, the Version Control service works with your session/credentials.
  2. Repositories defined through Altium Concord Pro (through the VCS page (Admin – VCS) of Concord Pro's browser interface) are populated to the client automatically during login, so users do not have to worry about URLs, protocols, password etc. It is configured once, on the server, and shared with the intended users as required.
When a new user for Altium Concord Pro is created, the defined Password for that user is stored in both Concord Pro and the SVN service, since the latter cannot access the password from the former directly.

Repository Creation

Repositories can be created through the local Version Control service (SVN-only), or external repositories can be connected to (SVN or Git). Together, all repositories are centrally managed through the VCS page (Admin – VCS) of Concord Pro's browser interface, in terms of:

  • Their displayed name, description and repository path.
  • Their configured accessibility – which specific users can access them (or roles in the case of repositories defined through the local Version Control service).
  • Their availability – add or remove them centrally, rather than individual designers having to create and connect to repositories independently.

When a user signs in to Altium Concord Pro, the Design Repositories available to them will automatically be added to the Data Management – Design Repositories page of the Preferences dialog.

 Repositories can be internal to the Altium Concord Pro installation, defined using the local Version Control service, or external through the use of Altium Designer's built-in SVN, or third party SVN or Git service. Access control is performed through the VCS page of Concord Pro's browser interface. Repositories can be internal to the Altium Concord Pro installation, defined using the local Version Control service, or external through the use of Altium Designer's built-in SVN, or third party SVN or Git service. Access control is performed through the VCS page of Concord Pro's browser interface.

Adding a Repository

To add a Design Repository, click the button, located at the top-right of the page. The Add Repository window will appear, use this to define the repository.

Only SVN-type repositories can be created through the local Version Control service. Existing (external) repositories can be linked to, and these can be either SVN or Git.

The properties required depend on whether you are creating a new repository using the local Version Control service, or linking to an existing, external repository:

  • New – simply give the repository a name and a description.
  • Existing – in addition to a name and description, you need to supply the URL to the repository, and your credentials (User Name, Password) to access that repository (if required).
When creating a repository that is internal to Altium Concord Pro, the name should start with, and can contain A-Z, a-z, or 0-9. Underscores, dashes, and spaces are allowed within the middle of the name. You can not use the following words: AUX, COM1-COM9, LPT1-LPT9, CON, NUL, and PRN. There are no naming restrictions for an external repository.

Create a new SVN-based Design Repository through Altium Concord Pro's local Version Control service, or link to an existing repository (SVN or Git) that has been created external to Altium Concord Pro.Create a new SVN-based Design Repository through Altium Concord Pro's local Version Control service, or link to an existing repository (SVN or Git) that has been created external to Altium Concord Pro.

A linked, external Design Repository is distinguished in the list of repositories by its External property being ticked ().

To edit the properties of a Design Repository at a later stage, click its associated Edit control (). To remove a Design Repository, click its associated Remove control ().

Remember that the default Git repository – Versioned Storage – cannot be modified in any way, nor deleted.

Sharing a Repository

Having centralized your Design Repositories, you need to ensure that those requiring access to a given repository – including the designers who will be working on board designs – have that access. This is achieved by sharing that repository, or rather managing its access permissions. To do this, click on the repository's associated Share control ().

The Manage Permissions window will appear, with all the controls necessary to share the repository with other users.

With Design Repositories centrally organized, sharing with others is simply a case of managing each repository's permissions.With Design Repositories centrally organized, sharing with others is simply a case of managing each repository's permissions.

Things to be aware of:

  • For a local repository created through Altium Concord Pro's Version Control service (i.e. not external), that repository is shared, by default, with the user who created the repository, and the Administrators role. Both of these have full Read/Write access.
  • For an external repository, it is shared with no one by default – not even the user who added a connection to it through the interface.
  • Only local repositories (not external) can be shared with defined roles for Altium Concord Pro, or with anyone (all users of that Concord Pro instance). Roles are listed after individual users.
  • In terms of permissions, a user/role has Read/Write access when the Can Write option is enabled (). If this option is disabled, they have Read access only.
Be Aware: The permission settings when sharing an internal design repository are not functioning exactly as one would expect. Even though an internal design repository itself could be shared for Read-only access with a server user, that user is still able to create NEW managed projects within that repository, and obtain full Read/Write permissions for the corresponding project folders that are created. Note that this erroneous functionality applies only to new managed projects and their folders, created by that user. The user will not have Write permissions to other folders in the repository.
  • To remove an existing user/role from having shared access to a repository, click the associated Remove control ().

External Access to a Local SVN Design Repository

An SVN Design Repository that is created through the local Version Control Service can be accessed using an SVN client such as TortoiseSVN. Access is made using the regular network protocol (svn). The correct repository address path can be copied from two places:

  • The VCS page of Altium Concord Pro's browser interface – within the Repository Path field for the target repository.

The address will depend on whether you are accessing the repository from the same machine on which Altium Concord Pro is installed (e.g. svn://127.0.0.1/<RepositoryName>, or svn://localhost/<RepositoryName>), or from a remote PC (e.g. svn://<ComputerName>/<RepositoryName>, where ComputerName is the name of the PC on which Altium Concord Pro resides).

Use the acquired address in your Subversion client's repository browsing facility. When a user is created in Altium Concord Pro, the credentials are used by both the Server itself, and the Version Control service. If the password is stored with the service – the authentication has been saved through the SVN client – then access to the repository will be immediate. If the password is not stored, an intermediate Authentication dialog will appear. Enter your user credentials and click OK to access the repository. See Server & VCS User Synchronization below for more information.

Browsing the content of a Design Repository created through the Altium Concord Pro installation's local SVN-based Version Control service.Browsing the content of a Design Repository created through the Altium Concord Pro installation's local SVN-based Version Control service.

A Design Repository that is created through the local Version Control service has its internal data stored in a corresponding sub-folder in the \ProgramData\Altium\ConcordProData\Repository folder (for a default installation of Altium Concord Pro). This folder should not be directly accessed in any way, other than by IT personnel for maintenance.

Server & VCS User Synchronization

When a new user for Altium Concord Pro is created, the defined credentials (User Name and Password) for that user are stored in both the Server's database and the Version Control service, since the latter cannot access the password from the former directly. The password is stored in the Version Control service in plain text format (in the \ProgramData\Altium\ConcordProData\Repository\passwd file).

The entries in this list provide access to the Concord Pro SVN repository when working with the service through Altium Designer. There may be occasions where a user's credentials are not included in the file, such as when Concord Pro users already exist when the first SVN repository is created (rather than the other way around). This can be addressed by manually adding those name/password combinations to the passwd file, or by re-entering the password for each user profile in Concord Pro – the latter approach will populate the passwd file accordingly, and without requiring direct access to the server PC.

In a default installation of Altium Concord Pro, user credentials are stored for the Version Control service in the associated passwd file.In a default installation of Altium Concord Pro, user credentials are stored for the Version Control service in the associated passwd file.

Deleting a Repository

To delete a repository from Altium Concord Pro's Version Control service, click the Remove control () associated with that repository, on the VCS page of Concord Pro's browser interface.

Note that removing a repository from the Data Management – Design Repositories page of the Preferences dialog only removes that repository from being used by that instance of Altium Designer. It does not delete the repository from Altium Concord Pro's Version Control service. If you sign out of Altium Concord Pro and back in again, the repository will appear once more in the list of repositories available to that instance of Altium Designer.

External repositories can be deleted (disconnected), irrespective of whether or not they contain any projects. Local repositories on the other hand (those created internally through Altium Concord Pro's Version Control service) can not be deleted if they contain one or more projects. You will be alerted to this, and should remove the projects first before being able to proceed with the deletion.

Even then, if a local repository has no projects, it will not actually be deleted, but rather moved to an archive directory (\ProgramData\Altium\ConcordProData\RepositoryDumps, for a default Altium Concord Pro installation). The repository will be contained within a Dump file, in the format <UniqueID>_<ProjectName>.dump (e.g. 775f6c22-b9a1-468c-9f1f-4f217bb3be6b_Central Design Repository.dump).

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content