Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 3.2
3.02.12.01.11.0
Close
搜索 Search on Documentation
Documentation Altium NEXUS 文档 ... 对话框参考 Dialogs((S to Z))_AD

EDesignData_Dlg-RevisionSchemeInitialIdEditorFormSet initial values_AD

Created: 一月 20, 2021 | Updated: 一月 20, 2021 | Applies to version: 3.0
您正在阅读的是 3.2. 版本。关于最新版本，请前往 EDesignData_Dlg-RevisionSchemeInitialIdEditorForm((Set initial values))_AD 阅读 3.0 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Set initial values dialog
The Set initial values dialog

Summary

The Set initial values dialog enables you to manually set the ID for the initial revision of a newly-created Item in an server. Modify the various levels of the ID in accordance with the chosen Revision Naming Scheme.

For information about revision naming schemes, see Defining Naming Schemes for Item Revision .

Access

The dialog is accessed by clicking  in the Revision ID field of the Edit Item dialog (right-click on an Item in the Explorer panel then choose Properties).

The Revision ID field is accessed in the Advanced version of the Edit Item dialog.
Options/Controls
  • Level <0> initial ID - use the  buttons to select the desired revision ID of the Level shown within the < >. You can also enter the desired value in the textbox.
The ID of the Item's first planned revision can be changed at any point after the Item is created and before data is released into that initial revision (i.e. it is still in the Planned state).
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.