WorkspaceManager_Cmd-RunMigrationToolRunMigrationTool_AD

Created: 一月 30, 2023 | Updated: 一月 30, 2023 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found using the following links:

Copying Components from Schematics Extracting 3D Models from a PCB Library

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Clear Server Links

Applied Parameters: ToolName=ClearVaultLinks

Summary

This command is used to clear the managed content server links for all components within the open document.

After running this command, the document will be saved.

Access

This command is accessed in the PCB Libray Editor and Schematic Library Editor by choosing the Tools » Clear Server Links command from the main menus.

Use

After launching the command, the Confirm Clear Vault Links dialog opens. Click Yes to clear the server links specified in the dialog; click No to exit from the dialog with no action.

Extract 3D Models

Applied Parameters: ToolName=Extract3DModels

Summary

This command is used to extract and save any 3D models present in the components in the active PCB library. All Generic 3D Model formats are exported (STEP, Parasolid® and SOLIDWORKS®). Altium Designer 3D Body objects are not exported.

Running this command will open the Generate 3D Model Files from PCB Libraries dialog.

Access

This command is accessed in the PCB Libray Editor by choosing the Tools » Extract 3D Models command from the main menus.

Use

After launching the command, the Generate 3D Model Files from PCB Libraries dialog will open. Specify the destination folder then click OK to extract the models. Each model will be written to a separate file.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

WorkspaceManager_Cmd-RunMigrationToolRunMigrationTool_AD

Summary

Access

Use

Summary

Access

Use

Was this page helpful?