VersionControl_Cmd-PastePaste_AD

Created: 七月 27, 2015 | Updated: 二月 19, 2019 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

您正在阅读的是 20.0. 版本。关于最新版本，请前往 VersionControl_Cmd-Paste((Paste))_AD 阅读 21 版本

The following pre-packaged resources, derived from this base command, are available:

Applied Parameters: None

Summary

This command is used to paste previously copied document(s) into the currently selected folder for the active project.

This command can be accessed from the Project Files region of the Storage Manager panel with the required target folder selected by:

The command will only be available provided one or more documents have been previously copied.

Ensure the folder into which you want to paste the copied document(s) is selected in the Folders region of the Storage Manager panel.

After launching the command, the previously copied document(s) will be pasted into the currently selected folder.

You may need to use the Refresh command (on the same right-click context menu for the region or F5) to refresh the content of the folder and see the newly pasted content.
The content on the clipboard can only be pasted once.

Applied Parameters: ObjectKind=Folder

This command is used to paste a previously copied folder or project directory into the folder structure for the active project.

This command can be accessed from the Folders region of the Storage Manager panel with the required target folder selected by:

The command will only be available provided a folder (or folder structure) has been previously copied.

Ensure the folder into which you want to paste the copied content is selected in the Folders region of the Storage Manager panel.

After launching the command, the previously copied folder content will be pasted into the currently selected folder.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.