Working with a Bezier Object on a Schematic Sheet in Altium Designer

Parent page: Schematic Objects

A placed Bezier curve

Summary

A Bezier curve is a non-electrical drawing primitive. It is a free-form curved line that can be placed on a schematic sheet. The curve is defined by a series of vertex points that 'pull' the line into a curved shape.

Availability

Beziers are available for placement in both Schematic and Schematic Library Editors:

• Schematic Editor - the following commands are available:
  • Choose Place » Drawing Tools » Bezier from the main menus.
  • Click the Bezier button () in the graphic objects drop-down on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.
  • Right-click in the workspace then choose Place » Drawing Tools » Bezier from the context menu.
• Schematic Library Editor - the following commands are available:
  • Choose Place » Bezier from the main menus.
  • Click the Bezier button () in the graphic objects drop-down on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.
  • Right-click in the workspace then choose Place » Bezier from the context menu.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter Bezier placement mode. Placement is made by performing the following sequence of actions:

1. Click or press Enter to anchor the starting point for the curve.
2. Move the cursor and click or press Enter to place a series of vertex points to define the curve. As you move the cursor, the curve will be continually redrawn to indicate how it would look if you placed a vertex at the cursor position.
3. After placing the final vertex point, right-click or press Esc to complete placement of the curve.
4. Continue placing further Bezier curves or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement while the Bezier is still floating on the cursor are:

• Press the Tab key to pause the placement and access the Bezier mode of the Properties panel from where its properties can be changed on-the-fly. Click the workspace pause button overlay ( ) to resume placement.
• Press the Alt key to constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement. 

Graphical Editing

This method of editing allows you to select a placed Bezier object directly in the workspace and change its size and/or shape graphically.

When a Bezier object is selected, the following editing handles are available:

A selected Bezier curve

• Click and drag an editing handle to "bend" the curve.
• Click anywhere on the Bezier away from editing handles and drag to reposition it. While dragging, the Bezier can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis).

The following methods of non-graphical editing are available:

Via the Bezier Dialog or Properties Panel

Properties page: Bezier Properties

This method of editing uses the associated Bezier dialog and Properties panel mode to modify the properties of a Bezier object.

  The Bezier dialog, on the left, and the Bezier mode of the Properties panel on the right

After placement, the Bezier dialog can be accessed by:

• Double-clicking on the placed bezier object.
• Placing the cursor over the bezier object, right-clicking then choosing Properties from the context menu.

During placement, the Bezier mode of the Properties panel can be accessed by pressing the Tab key. Once the bezier is placed, all options appear.

After placement, the Bezier mode of the Properties panel can be accessed in one of the following ways:

• If the Properties panel is already active, by selecting the bezier object.
• After selecting the bezier object, select the Properties panel from the Panels button in the bottom right section of the workspace, or by select View » Panels » Properties from the main menu.

Via a List Panel

Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter

A List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter allowing you to target and edit multiple design objects with greater accuracy and efficiency.