Altium Designer 文档
...
对话框参考
Dialogs((M to R))_AD
Sch_Dlg-ChangeNetLabelNet Label_AD
Created: 六月 08, 2017 | Updated: 六月 18, 2017
| Applies to version: 17.1
您正在阅读的是 18.0. 版本。关于最新版本，请前往 Sch_Dlg-ChangeNetLabel((Net Label))_AD 阅读 17.1 版本
The Net Label dialog.
Summary
This dialog allows the designer to specify the properties of a Net Label object. As well as providing a human-friendly identifier for a net, a net label allows you to connect points on a circuit without actually physically wiring them together.
Access
The Net Label dialog can be accessed prior to entering placement mode, from the Schematic – Default Primitives page of the Preferences dialog. This allows the default properties for the net label object to be changed, which will be applied when placing subsequent net labels.
During placement, the dialog can be accessed by pressing the Tab key.
After placement, the dialog can be accessed in one of the following ways:
- Double-clicking on the placed net label object.
- Placing the cursor over the net label object, right-clicking and choosing Properties from the context menu.
- Using the Edit » Change command and clicking once over the placed net label object.
Options/Controls
- Color - click the color sample to change the color used for the label's text, using the standard Choose Color dialog.
- Location X/Y - the current X (horizontal) and Y (vertical) coordinates for the connection point of the net label (its electical hotspot). Edit these values to change the position of the net label in the horizontal and/or vertical planes respectively.
- Orientation - specify the orientation of the net label, counter-clockwise in relation to the horizontal. Options available are: 0 degrees, 90 degrees, 180 degrees, 270 degrees.
Properties
- Net - this field shows the name of the net associated with the net label. Placing a net label onto an electrical object assigns that object to the net specified here. Either enter the name of the required net directly, or use the field's associated drop-down to access a list of all currently defined names from all other net labels and ports defined on the active schematic sheet.
- Font - this control serves two purposes. Firstly, it reflects the currently chosen font – applied to the text for the associated net name - in terms of Font Name, Font Size and Font Style. Secondly, when clicked it provides access to the standard Font dialog, from where to change the font as required.
- Locked - enable this option to protect the net label from being edited graphically.