Altium Designer 文档
...
PCB Query((Fields))_AD
PCB Query Fields((M to R))_AD
Query_Lang-PCBFunctions_Fields_RuleTypeRuleType_AD
Created: 六月 23, 2017 | Updated: 六月 23, 2017
| Applies to versions: 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 17.0. 版本。关于最新版本，请前往 Query_Lang-PCBFunctions_Fields_RuleType((RuleType))_AD 阅读 21 版本
Parent page: PCB Query Functions - Fields
Summary
Returns all design rule objects having a Rule Type property that complies with the Query.
Syntax
RuleType = RuleType_String
RuleType <> RuleType_String
RuleType_String must be one of the following strings:
- Electrical Rules –
'Clearance','Short-Circuit','Un-Routed Net','Un-Connected Pin', 'Modified Polygon' - Routing Rules –
'Width','Routing Topology','Routing Priority','Routing Layers','Routing Corners','Routing Via Style','Fanout Control', 'Differential Pairs Routing' - SMT Rules –
'SMD To Corner','SMD To Plane','SMD Neck-Down', 'SMD Entry' - Mask Rules –
'Solder Mask Expansion','Paste Mask Expansion' - Plane Rules –
'Power Plane Connect Style','Power Plane Clearance','Polygon Connect Style' - Testpoint Rules - 'Fabrication Testpoint Style', 'Fabrication Testpoint Usage', 'Assembly Testpoint Style', 'Assembly Testpoint Usage'
- Manufacturing Rules - 'Minimum Annular Ring', 'Acute Angle', 'Hole Size', 'Layer Pairs', 'Hole To Hole Clearance', 'Minimum Solder Mask Sliver', 'Silk To Solder Mask Clearance', 'Silk To Silk Clearance', 'Board Outline Clearance'
- High Speed Rules - 'Parallel Segment', 'Length', 'Matched Lengths', 'Daisy Chain Stub Length', 'Vias Under SMD', 'Maximum Via Count', 'Max Via Sub Length (Back Drilling)'
- Placement Rules – 'Room Definition',
'Component Clearance','Component Orientations','Permitted Layers','Nets to Ignore','Height' - Signal Integrity Rules - 'Signal Stimulus', 'Overshoot - Falling Edge', 'Overshoot - Rising Edge', 'Undershoot - Falling Edge', 'Undershoot - Rising Edge', 'Impedance', 'Signal Top Value', 'Signal Base Value', 'Flight Time - Rising Edge', 'Flight Time - Falling Edge', 'Slope - Rising Edge', 'Slope - Falling Edge', 'Supply Nets'
Example Usage
RuleType = 'Clearance'
Returns all design rule objects whose Rule Type property is Clearance.
RuleType <> 'Paste Mask Expansion'
Returns all objects except design rule objects whose Rule Type property is Paste Mask Expansion.
IsRule && RuleType <> 'Height'
Returns all design rule objects whose Rule Type property is not Height.
Tips
- The Rule Type property is only defined for design rule objects.
- The single quote characters (') at the start and end of
RuleType_Stringare mandatory.