Altium Designer 文档
...
PCB Query((Fields))_AD
PCB Query Fields((M to R))_AD
Query_Lang-PCBFunctions_Fields_PadXSize_TopLayerPadXSize_TopLayer_AD
This document is no longer available beyond version 21. Information can now be found here: PadXSize_TopLayer for version 25
Parent page: PCB Query Functions - Fields
Summary
Returns pad objects whose X Size (Top Layer) property complies with the Query.
Syntax
PadXSize_TopLayer : Number
Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).
A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:
AsMils(PadXSize_TopLayer) : Number– to specify a size in mil.AsMM(PadXSize_TopLayer) : Number– to specify a size in mm.
Example Usage
PadXSize_TopLayer = 100
Returns all pad objects whose X Size (Top Layer) property is equal to 100 current measurement units.
PadXSize_TopLayer >= 4.064
Returns all pad objects whose X Size (Top Layer) property is greater than, or equal to, 4.064 current measurement units.
AsMils(PadXSize_TopLayer) > 80
Returns all pad objects whose X Size (Top Layer) property is greater than 80mil.
AsMM(PadXSize_TopLayer) Between 1.524 And 3.81
Returns all pad objects whose X Size (Top Layer) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.
PadXSize_TopLayer <> 50
Returns all pad objects whose X Size (Top Layer) property is not equal to 50 current measurement units.
Tips
- For simple pads (with Stack Mode set to Simple) the X Size (Top Layer) property will be the same as the X Size (All Layers) property, since the specified size is used for all signal layers.
- The X Size (Top Layer) property is only defined for pad and via objects.