Altium Designer 文档
...
PCB Query((Fields))_AD
PCB Query Fields((M to R))_AD
Query_Lang-PCBFunctions_Fields_Pad_CornerRadius_MidLayer3Pad_CornerRadius_MidLayer3_AD
Created: 九月 03, 2015 | Updated: 八月 11, 2021
| Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 18.0. 版本。关于最新版本，请前往 Query_Lang-PCBFunctions_Fields_Pad_CornerRadius_MidLayer3((Pad_CornerRadius_MidLayer3))_AD 阅读 21 版本
Parent page: PCB Query Functions - Fields
Summary
Returns pad objects whose Pad Corner Radius (%) (Mid Layer 3) property complies with the Query.
Syntax
Pad_CornerRadius_MidLayer3 = CornerRadius_String
Pad_CornerRadius_MidLayer3 <> CornerRadius_String
CornerRadius_String specifies the corner radius, expressed as a percentage.
Example Usage
Pad_CornerRadius_MidLayer3 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 3) property equals 50%.
Pad_CornerRadius_MidLayer3 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 3) property equals 30%.
Tips
- The single quote characters (') at the start and end of
CornerRadius_Stringare mandatory. - For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 3) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
- For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 3) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
- The Pad Corner Radius (%) (Mid Layer 3) property is only defined for pad objects.