Altium Designer 版本发布说明
Created: 七月 21, 2019 | Updated: 七月 21, 2019
| Applies to version: 19.1
您正在阅读的是 19.1. 版本。关于最新版本，请前往 Altium Designer 版本发布说明 阅读 25 版本
以下内容阐述了Altium Designer 19.1公开发布版本的发布说明。
19.1.6 版本
Build: 110 Date: 17 July 2019
| 32101 | Fixed a bug that occurred when importing projects with the CADSTAR importing wizard. |
| 32221 | The origin in the PCB library editor is now snapped to correctly when Footprint Origin snapping is enabled. |
| 32224 | Fixed a bug that made it impossible to change settings for snapping. |
| 32228 | The midpoint of a pad edge is now snapped to if Pad Vertices is enabled as an Object for Snapping. |
| 32229 | The last-placed via stack configuration is now saved as preferred during the current PCB editing session and is then used for the next routing layer change (if applicable). |
| 32236 | Fixed a bug where gerber file extensions featured in Layer Stack Tables of PCB documents did not correspond to the correct file extension. |
| 32286 | The Grids, Guides & Axes snap enable buttons have been added to the Properties panel in the PCB library editor (BC:11187). |
| 32562 | Fixed an error that occurred when Altium Designer was starting if it was resized, minimized, and displayed an active Draftsman document. |
| 32595 | Fixed regression where the Fill Style applied to a Draftsman Circle object is not visible. |
| 32629 | Fixed issue where the target Differential Pair Tuning length match could not be achieved when xSignals are applied. |
| 32784 | Fixed issue where unconnected mid-layer pads are incorrectly included in the Gerber output when Backdrilling is applied and the 'Include unconnected mid-layer pads' option is unchecked (BC:11121). |
| 32925 | Fixed regression in 2D/3D PCB display rendering where the Plane Clearance was not visible for Backdrilled holes (BC:10808). |
| 32994 | Fixed an Ansys EDB Exporter bug that caused some pad sizes to increase in size when opened in Ansys software. |
| 33214 | Fixed an issue with the Draftsman Layer Stack Legend that caused Backdrill Vias to start from the Surface Finish Layer rather than the Top/Bottom Layer in symmetrical layer stacks. |
| 33218 | A new Surface Finish layer has replaced the Copper plating layer within the Layer Stack Manager. |
| 33245 | Fixed an issue with the Ansys EDB Exporter where origin errors would occur when a comma has been used as the decimal separator. |
19.1.5 版本
Build: 86 Date: 7 May 2019
平台
| 30138 | “打开项目”对话框中列出的项目所显示的日期/时间格式取决于电脑的系统区域设置。 |
| 30249 | 将面板移动并放置在另一监视器的第二个非当前设计窗口时发生的崩溃已修正。 |
| 30511 | 已解决多种用户界面问题，包括：对话框未能应用选定的用户界面主题，对话框没有保留其屏幕位置，PCB测量文本未正确缩放，以及xSignals向导的图像质量差。 |
| 30656 | 重命名的调试日志位于...\AppData\Local\Altium\[Product GUID]文件夹，而非当前项目文件夹（BC:10462）。 |
| 30722 | 存储和处理更新的路径优选设置，以免产生本地环境下的路径别名（BC:9552）。 |
| 31089 | 修正了搜索热键的本地化问题。 |
| 29016 | 增加了对Eagle 9.x格式的支持以及多种修正和增强特性。 |
| 30784 | 修正了一系列第三方设计项目导入器中的缺陷，包括Allegro、 Eagle、OrCAD、PADS Logic、PADS Layout、xDX Designer、Xpedition和Zuken CR5000。 |
| 31027 | 修正了DXF/DWG输出中的缺陷，将用户定义的相对参考原点纳入输出文件（BC:8195）。 |
数据管理
| 23815 | 修正了当本地项目文件与VCS项目文件均过时时，Project Releaser报告的“Git repository not clean”错误。 |
| 25824 | 物料清单文档和元器件面板中的过滤器选项列均支持选择自定义过滤器功能。 |
| 28696 | 修正了Project Releaser在生成ODB++输出文件时挂起的缺陷。 |
| 29071 | 修复了如果Project Releaser多次运行和关闭，系统GDI对象和内存将无法释放的问题。 |
| 29752 | 修正了在批处理模式下使用元器件编辑器时未能应用选定模板的缺陷。还增加了自动排序功能和无模板选项。 |
| 30104 | 提高了元器件库迁移器的性能。 |
| 30224 | 修正了在响应因当前项目远程更新而引起的VCS冲突时报告“Git存储库未清理”错误的缺陷。 |
| 30398 | 修正了使用PCB和项目发布器编译后出现的“无法验证版本状态：未找到版本”错误（BC:8273）。 |
| 30444 | 解决了在元器件面板的类别项中点击*.DbLib会出现“Starting PCB Editor...”的消息，并且软件会冻结一段时间的问题。 |
| 30526 | 解决了右键单击Explorer面板时偶尔会出现“Duplicated primary key”错误的问题。 |
| 30603 | 修正了在托管项目的原理图之间切换时导致软件冻结的问题。 |
| 31032 | 向Variant Manager对话框添加了水平滚动条，以便更好地访问多个变量条目（BC：9814）。 |
| 31247 | 在元器件库迁移器中添加了迁移本地数据表单的选项。 |
| 31644 | 解决了GIT注释过程中存储时间和编写人证书有误的问题。 |
| 31940 | 修正了导致元器件面板的自定义缩放无法保存的问题。 |
| 31976 | 修正了在替换元器件对话框中的Where Used区域无法续接“Where Used”链接的缺陷。 |
原理图
| 28002 | 修正了当选定原理图元器件库基元时，属性面板在元器件模式而非对象基元模式下打开的问题。 |
| 29122 | 修正了软件重启后导致原理图捕捉栅格行为不当的问题，以及窗口区域设置为德语的问题。 |
| 30288 | 修正了标注后更新PCB文件时“Can't perform revision status validation”的错误。 |
| 30484 | 修正了导致更新后的元器件采用默认封装而非首选封装的缺陷。 |
| 30596 | 添加了自动保存符号向导窗口的位置、大小和布局的功能。 |
| 30616 | 修改了元器件识别逻辑和参数处理，以改进元器件库生成（制作元器件库）过程。 |
| 30854 | 修正了导致原理图未按照参数变量指定的颜色和风格显示字体的变量问题（BC:10440）。 |
| 30857 | 修正了在“元器件替换”操作中将用户字体重置回“Times New Roman”风格的缺陷（BC:2727）。 |
| 31025 | 修复了本地文件夹中的文档的部分引用（右键单击，引用子菜单）无法显示结果的问题（BC：2989）。 |
| 31040 | 端口符号的端口交叉引用文本自动列于信号线束入口的对侧（BC:10424）。 |
| 31260 | 修正了如下问题，即，重新打开使用过Edit » Move » Bring to Front命令（作为先前的编辑会话的一部分）的某个原理图文件，并由此而产生错误。 |
| 31364 | 修正了在设计中放置大量数据库元件库的元器件导致软件性能下降的问题。 |
| 31744 | 修复了无法将差分对类添加到一组选定指令的问题。 |
| 32014 | 修复了将类名添加到即时创建的差异对时导致违规的错误。 |
部件搜索
| 29731 | 修正了制造商部件搜索面板中，每当加载新的页面清单时会丢失已指定的列顺序的缺陷。 |
| 29792 | 修正了制造商部件搜索面板无法访问配置了Excel源的定制部件供应商的缺陷。 |
| 30208 | 修正了制造商部件搜索面板在紧凑（窄）模式中的缺陷，即，面板未显示搜索结果，详细信息区缺少滚动条，并且排在最前的条目将在面板调整大小后被裁剪。 |
| 31183 | 解决了因制造商部件搜索过滤器面板对前导零处理不当而产生的问题，例如，元器件用例类别（BC:10874）。 |
| 31523 | 解决了如果部件供应商参数导入选项中启用后缀选项，则价格信息内的“=”符号周围会出现冗余空格的问题。 |
物料清单
| 27304 | 修正了当选择“MS Excel File”格式类型时，根据模板生成的物料清单输出报告丢失格式的缺陷。 |
| 28895 | 修正了当至少存在一个致命错误时，在Output Job文件中定义的物料清单检查验证报告（作为使用项目发布者发布的电路板的一部分）永远不会失败的问题。 |
| 29347 | 解决了MS Excel文件（*.xls、*.xlsx）格式的物料清单在使用选定的Excel模板时偶尔会产生错误的问题。 |
| 29373 | 增加了从ActiveBOM中变更/替换现有元器件时可以选择和使用基于文件的元件库中的元器件（“非托管”元器件）的能力。 |
| 30375 | 修复了在“行选项”对话框中阻止ActiveBOM行开始编号设置为大于1000的Bug。 |
| 30803 | 解决了BomDoc设置（如，不同物料条目的解决方案）未传入OutJob或物料清单报告的问题。 |
| 30986 | 修正了物料清单报告不能识别模板中的隐藏Excel表格的问题（BC:10638）。 |
| 31269 | 修正了当系统区域设置为荷兰语时，根据模板生成的物料清单中ReportDate字段不正确的缺陷。 |
| 31682 | 修正了当尝试按Excel格式生成物料清单报告时引发异常的问题（“来自HRESULT的异常：0x800AC472”）。 |
PCB
| 24898 | 修正了在折叠刚柔结合板设计中不能检测DRC违规（如间距问题）的缺陷（BC:9007）。 |
| 25738 | 通过电路板属性面板实现的其他PCB对象捕捉选项（弹出快捷方式CTRL+E）（BC:7998、BC:5591）。 |
| 25883 | 修正了在选定多个对齐的焊盘时，属性面板所示的PCB基元位置数据舍入错误。 |
| 27818 | 修正了在某些情况下，已免责的违规在运行了设计规则检查对话框后又作为违规返回的Bug。 |
| 28440 | 修正了无法使用对象句柄手动调整PCB层堆栈表大小的缺陷。 |
| 28447 | 修正了不能从CSV文件中将多边形或区域顶点数据通过粘贴或导入方式输入属性面板的边框顶点区的问题（BC:9873）。 |
| 29574 | 修正了如下问题，其中所有Pads / Vias都显示在“Update Pads / Vias”对话框中，而不仅仅是需要更新的那些。 |
| 29889 | 修正了当显示器在2D模式和3D模式之间循环后，PCB编辑器的调光、屏蔽和网络高亮模式将重置的问题。 |
| 30081 | 导入stackup文件后，会将正确的阻抗配置文件加载至规则中。 |
| 30350 | 修正了层堆栈材料库的问题，即，如果先前已隐藏列，则不会为新材料条目显示所有必需参数字段。 |
| 30528 | 修正了IPC-2581输出生成器的Bug，即因为解析圆弧为错误的旋转方向而导致电路板边框出现错误（BC:9884）。 |
| 30550 | 修正了当系统语言设置为朝鲜语以及导入设计规则文件（*.RUL）时导致崩溃的缺陷。 |
| 30706 | 修正了用于移动元器件和交互式布线等进程的布线器引擎内存泄漏问题。 |
| 30776 | 修正了PCB重新标注后xSignals中断的问题（BC:9862）。 |
| 30817 | 修正了将损坏的STEP封装模型和其他封装保存在一起会导致所有STEP模型转换为挤压体的缺陷。 |
| 30913 | 在属性面板和快捷按钮栏中增加了常见的默认PCB捕捉设置（按下Shift+E键可循环捕捉选项，按下CTRL+E键可弹出捕捉选项）。 |
| 30927 | 修复了在其他图层处于活动状态后阻止活动图层集的指定图层恢复的问题。 |
| 30934 | 在快捷按钮栏中增加了速访捕捉功能。交互过程中可以启用捕捉选项（快捷键Ctrl+E）（BC:9759）。 |
| 30938 | 解决了变更设计规则范围和重新运行DRC可能导致访问冲突的问题。 |
| 30964 | 修正了无法从PCB元器件库导出/导入机械层和层对的问题。 |
| 30982 | 修正了放置嵌入式板阵列时产生冲突的Bug。 |
| 31012 | 恢复了PCB的尺寸特征：中心、基线尺寸以及线性和径向直径的尺寸（BC:8946、BC:9257、BC:8936）。 |
| 31026 | 修正了元器件边界框的定义中包含机械层基元的缺陷（BC:1261）。 |
| 31033 | 增加了在层堆栈表中管理各列显示内容的能力——显示/隐藏、编辑名称和修改列顺序（BC:7597）。 |
| 31036 | 向层堆栈表添加Gerber名称列的可用性（BC:3623）。 |
| 31037 | 向层堆栈表添加计算的电路板总厚度选项（BC:9225）。 |
| 31038 | 更新的层堆栈表的层编号将与层堆栈管理器中的铜层编号同步（BC:10123）。 |
| 31039 | 解决了打印输出中包含PCB剪切块的问题（BC:461）。 |
| 31133 | 3D体布局分为两个命令——使用Place » 3D Body来放置MCAD模型，或使用Place » Extruded 3D Body对挤压3D体对象启动交互布局（与AD19.0的Place » 3D Body命令行为相同）（BC:10675；BC:9734）。 |
| 31135 | 更新了2D/3D功能，以便在对象的3D体透明度设置为0%时，其2D几何图形仍然可见（BC:1867）。 |
| 31141 | 修正了当电路板源为镜像的嵌入式阵列时，导致Gerber输出在错误位置生成中间层焊盘的错误。 |
| 31168 | 修正了从嵌入式板阵列（面板源）生成的Gerber X2输出中缺少电镀过孔信息的缺陷。 |
| 31169 | 修正了PCB元器件库编辑器中Slice Track功能不可用的缺陷（BC:8943）。 |
| 31296 | 修正了布线被多边形阻挡/重叠导致的有关显示间隙边界的问题。 |
| 31323 | 增加了将PCB Keepout层设置为Draft、Hide和可变透明度的能力（BC:10357；BC:10292）。 |
| 31339 | 添加了层颜色交叉阴影填充到PCB Keepout层（BC：4750）。 |
| 31356 | 对层堆栈表添加了列管理属性支持（BC:7597）。 |
| 31368 | 修正了特定PCB设计文件的xSignal值显示为“断开”的Bug。 |
| 31434 | 解决了IPC-2581输出中，通过网络接点连接的网络作为不同网络报告的问题。 |
| 31612 | 在属性面板中恢复电路板选项布局的PCB图纸设置（BC:8600）。 |
| 31622 | 解决了粘贴时未正确定义复制/粘贴参考点的问题。 |
| 31648 | 修正了在PCB中，在某些特定情况下移动元器件会添加零长度走线的问题。 |
| 31649 | 解决了即使正确生成DXF/DWG文件，DXF/DWG导出也会报告“导出失败”的问题。 |
| 31675 | 解决了变更相对原点会将该原点设置为点击位置左侧1个栅格单位的问题。 |
| 31842 | 修正了在窗口区域设置中使用十进制","符号时，PCB列表面板中的X和Y坐标值变更为不正确值的问题。 |
| 31893 | 修正了在调用更新焊盘/过孔模板命令时显示所有焊盘和过孔（包括不需要更新的焊盘和过孔）的Bug。 |
| 31942 | 修正了在“制作PCB元器件库”过程中，“铜区域”代替“Keepout区域”的缺陷（BC:5538）。 |
| 32063 | 修正了因通过手动移动走线或交互式布线完成布线而导致Xsignals中断的问题。 |
| 32070 | 为ODB++、IPC-D-356A和IPC-2581输出添加了“Merge Net-Tie Nets”选项（BC:961、BC:3738）。 |
| 32102 | PCB捕捉选项已根据单独的栅格、轴和参考线选项更新。此外，捕捉到栅格和参考线目前独立于全局启用\禁用选项（快捷键Ctrl+E）工作。 |
| 32122 | 视图配置面板中显示机械层编号。 |
| 32163 | 修正了如果存在起始顶层和停止底层相同的微孔，NC钻孔输出中缺少HDI-TH过孔的缺陷（BC:11078）。 |
| 32190 | 修正了“来自规则”的交互式长度调整的问题，即当改变目标长度时，会导致不停的DRC环路错误，一直到某个折叠线取消选择。 |
| 32208 | 修复了PCB列表面板打开时打开特定PCB文档时发生崩溃的问题。 |
Draftsman
| 18437 | 添加了Draftsman X / Y轴刻度对象，可以放置并连接在任意两个绘图视点之间。 |
| 21531 | 将Draftsman Bookmarks TOC数据添加至其PDF输出生成进程中（BC:6614）。 |
| 25612 | 增加了向任何基元放置尺寸的能力（BC:7287；BC:9574）。 |
| 30379 | 列物理层编号已添加至Draftsman的层堆栈图例中。 |
| 30587 | 增加了将单个Draftsman Callout应用于文件的多源/点的能力。 |
| 30753 | 修正了如果元器件名称中包含“/”字符并且启用了FIPS系统加密算法时，则会阻止放置Draftsman图纸视图的错误。（BC:10507）。 |
| 30838 | 修正了导致钻孔符号在放置的钻孔视图中翻转（镜像）的问题。 |
| 31382 | 修正了从PCB文件导入变更后，不允许保存Draftsman文件的问题。 |
| 31514 | 修复了由最近的Windows更新“1809”（BC：10498）引起的Draftsman Assembly Drawing输出中的字体渲染错误。 |
| 31634 | 向Draftsman添加直径尺寸对象。 |
| 31683 | 修复了在某些Draftsman文档设计中缺少制造视图的问题，尽管PCB上正常存在图形。 |
| 31714 | 修复了在Draftsman中编辑对象时捕捉移位的Bug。 |
多板
| 27474 | 修正了多板PCB显示错误，其中没有显示阻焊层圆弧。 |
| 28996 | 向多板装配编辑器添加视图配置面板。使用面板配置投影风格、截面视图模式和平面，以及系统色彩分配。 |
| 29687 | 恢复了在多板装配面板中变更PCB层可见性的能力（BC:10616）。 |
| 30163 | 截面视图支持单独显示X、Y和Z剖面。这些剖面已启用，并且已在视图配置面板中设置了各自的方向。截面视图有三种显示模式：关闭、打开（使用截面图，平面则不可见）和编辑（使用截面图，平面可见也可编辑）。拖动彩轴柄可移动截面。 |
| 30194 | 修正了多板装配视图中的3D渲染问题，这种问题可能在PCB设计中出现，包括挤压3D体。 |
| 30199 | 修正了盲孔显示为通孔的缺陷。 |
| 30496 | 添加了多板选项，可在执行ECO期间或导入电路板文件时跳过分立的3D体。 |
| 30497 | 添加了多板选项，可将元器件或STEP模型设置为半透明（BC:9454）。 |
| 30674 | 添加了OutJob支持，便于将多板组件作为STEP或Parasolid X_T输出。 |
| 31071 | 多板组件中的STEP模型可以通过再次右键单击，然后“Update Selected 3D Body”命令进行更新，对象的位置和用户定义的配对将保留。 |
| 31346 | 解决了多板原理图编辑器在属性面板的连接区域会将“From pin”显示为“To pin”的问题。 |
| 31772 | 添加键盘快捷键L，可打开多板装配视图配置面板。 |
元器件面板
| 28243 | 元器件面板——在详细信息区域列出的参数中添加收藏夹功能，当列表处于“显示较少信息”模式时，会列出带星号（已收藏）的参数。展开参数列表可访问星号功能，单击右键可重置。 |
| 29386 | 更新的元器件面板在仅打开原理图类型文件进行编辑时不显示PCB库文件。 |
| 29890 | 修复了元器件面板中的错误，其中已收藏过滤器（已加星标）未在会话或面板实例之间正确保留，并且未显示在过滤器列表的顶部。 |
| 30441 | 修正了在优选设置中编辑元器件类型列表后，其分类导航树未进行刷新的元器件面板缺陷。 |
| 30608 | 将“查找相似元件”功能添加至元器件面板——通过右键单击列出的元器件来访问。 |
| 31072 | 修正了元器件面板中列出的基于文件的元器件库的顺序与基于文件的元器件库优选设置中的指定顺序不匹配的问题（BC:10464）。 |
| 31201 | 安装大量非托管（基于文件的）元器件库时，元器件面板类别加载速度提高。 |
| 31288 | 增加了在元器件面板和制造商部件搜索面板中选择、编辑或添加到当前搜索字符串“导航栏”的能力（BC:10787）。 |
| 31562 | 修正了元器件面板在重新登录后未能恢复上次会话内容的问题。 |
| 31650 | 修正了在数据管理——元器件类型优选设置页面中创建新元器件类型时忽略名称字段的某些符号的问题。 |
| 31806 | 修正了使用SvnDbLib时元器件面板的问题。更新SvnDbLib后，刷新元器件库功能按预期运行（BC:1195）。 |
The following sections list the release notes for publically released versions of Altium NEXUS 2.1
Version 2.1.6
Build: 59 Date: 17 July 2019
| 32101 | Fixed a bug that occurred when importing projects with the CADSTAR importing wizard. |
| 32221 | The origin in the PCB library editor is now snapped to correctly when Footprint Origin snapping is enabled. |
| 32224 | Fixed a bug that made it impossible to change settings for snapping. |
| 32228 | The midpoint of a pad edge is now snapped to if Pad Vertices is enabled as an Object for Snapping. |
| 32229 | The last-placed via stack configuration is now saved as preferred during the current PCB editing session and is then used for the next routing layer change (if applicable). |
| 32236 | Fixed a bug where gerber file extensions featured in Layer Stack Tables of PCB documents did not correspond to the correct file extension. |
| 32286 | The Grids, Guides & Axes snap enable buttons have been added to the Properties panel in the PCB library editor (BC:11187). |
| 32562 | Fixed an error that occurred when Altium Designer was starting if it was resized, minimized, and displayed an active Draftsman document. |
| 32595 | Fixed regression where the Fill Style applied to a Draftsman Circle object is not visible. |
| 32629 | Fixed issue where the target Differential Pair Tuning length match could not be achieved when xSignals are applied. |
| 32784 | Fixed issue where unconnected mid-layer pads are incorrectly included in the Gerber output when Backdrilling is applied and the 'Include unconnected mid-layer pads' option is unchecked (BC:11121). |
| 32925 | Fixed regression in 2D/3D PCB display rendering where the Plane Clearance was not visible for Backdrilled holes (BC:10808). |
| 32994 | Fixed an Ansys EDB Exporter bug that caused some pad sizes to increase in size when opened in Ansys software. |
| 33214 | Fixed an issue with the Draftsman Layer Stack Legend that caused Backdrill Vias to start from the Surface Finish Layer rather than the Top/Bottom Layer in symmetrical layer stacks. |
| 33218 | A new Surface Finish layer has replaced the Copper plating layer within the Layer Stack Manager. |
| 33245 | Fixed an issue with the Ansys EDB Exporter where origin errors would occur when a comma has been used as the decimal separator. |
Version 2.1.5
Build: 53 Date: 7 May 2019
Platform
| 30138 | The Date/Time format that is shown for projects listed in the Open Project dialog is now determined by the PC's system Region settings. |
| 30249 | Fixed crash that occurred when attempting to move and dock a panel onto a second, non-active design window in another monitor. |
| 30511 | Resolved a number of UI issues, including: dialogs not applying the selected UI Theme, dialog not retaining its on-screen location, PCB measurement text not scaling correctly, and poor quality images in the xSignals Wizard. |
| 30656 | Renamed Debug log now generated in the ...\AppData\Local\Altium\[Product GUID] folder rather than in the current project folder (BC:10462). |
| 30722 | Updated the way path preferences are stored and handled to avoid local environment path aliases (BC:9552). |
| 31089 | Fixed localization issue with Search hotkey. |
| 29016 | Support added for Eagle 9.x format along with numerous fixes and enhancements. |
| 30784 | Fixed bugs in a range of third-party design project importers including; Allegro, Eagle, OrCAD, PADS Logic, PADS Layout, xDX Designer, Xpedition, Zuken CR5000. |
| 31027 | Fixed bug in DXF/DWG export to now include user-defined relative reference origin in exported file (BC:8195). |
Data Management
| 23815 | Fixed a "Git repository not clean" error reported by the Project Releaser when a local project file is out of date with the VCS project files. |
| 25824 | The Custom Filter feature is now available from the column listing Filter options in the both a BOM document and the Components panel. |
| 28696 | Fixed bug where Project Releaser would hang when generating an ODB++ output file. |
| 29071 | Fixed bug where system GDI objects and memory would not be released if the Project Releaser is run and closed multiple times. |
| 29752 | Fixed bug where a selected Template was not applied when using the Component Editor in batch mode. Also added automatic sorting and the option to select no template. |
| 30104 | Improved Library Migrator performance. |
| 30224 | Fixed bug that reported a "Git repository not clean" error in response to a VCS conflict caused by a remote update to the active project. |
| 30398 | Fixed error "Can't perform revision status validation: Revision not found" on compile after PCB PCB and using Project Releaser (BC: 8273). |
| 30444 | Fixed an issue where the software would freeze for a period of time, with the message "Starting PCB Editor..." in the Status Bar, when clicking on *.DbLib in the Categories within the Components panel. |
| 30526 | Resolved issue where the error "Duplicated primary key" could occasionally occur when right-clicking in the Explorer panel. |
| 30603 | Fixed an issue that caused the software to freeze when switching between schematics of managed projects. |
| 31032 | Added horizontal scroll bar to Variant Manager dialog for better access to multiple variant entries (BC:9814). |
| 31247 | Added the option in the Library Migrator to migrate local datasheets. |
| 31644 | Resolved an issue where the incorrect time and author credentials were being stored during a GIT comment. |
| 31940 | Fixed regression that caused the custom resizing of the Components Panel to not be saved. |
| 31976 | Fixed a bug with 'Where Used' section in Replace Component dialog not allowing to follow Where Used links. |
Schematic
| 28002 | Fixed bug where the Properties panel would open in Component rather than object primitive mode when a SCH Library primitive is selected. |
| 29122 | Fixed bug that caused incorrect schematic Snap Grid behavior after the software has been restarted, and where the Windows region is set to German. |
| 30288 | Fixed "Can't perform revision status validation" error when updating PCB documents after annotation. |
| 30484 | Fixed bug that caused an updated component to adopt the default rather than the preferred footprint. |
| 30596 | Added automatic saving of Symbol Wizard window's position, size, and layout. |
| 30616 | Revised component identification logic and parameter handling to improve library generation (Make Library) process. |
| 30854 | Fixed Variants regression where the specified font color style for parameter variations is not shown in the schematic (BC:10440). |
| 30857 | Fixed bug that reset the user's font back to 'Times New Roman' during the 'component replacement' actions (BC:2727). |
| 31025 | Fixed an issue where part references (Right-click, References sub-menu) to documents in a local folder would show no results (BC:2989). |
| 31040 | The Port Cross Reference text for a Port symbol is now automatically placed on the opposite side of a Signal Harness entry (BC:10424). |
| 31260 | Fixed a regression issue where reopening a schematic document in which, as part of its previous editing session, the Edit » Move » Bring to Front command had been used, caused an error. |
| 31364 | Fixed software performance degradation when a significant number of database library components are placed in a design. |
| 31744 | Fixed an issue where a diff pair class could not be added to a group of selected directives. |
| 32014 | Fixed bug that caused a violation when adding Class Name to a diff pair that has been created on-the-fly. |
Part Search
| 29731 | Fixed bug in Manufacturer Part Search panel where the specified column order was lost when an additional page listing is loaded. |
| 29792 | Fixed bug where a configured Custom Parts Provider with an Excel source could not be accessed by the Manufacturer Part Search panel. |
| 30208 | Fixed bugs in the compact (narrow) mode of the Manufacturer Part Search panel where the Search results were not shown, the Details section lacked scrollbars and the first listed entry would be cropped after a panel resize. |
| 31183 | Resolved an issue where the Manufacturer Part Search Filter panel was incorrectly handling leading zeros in values, for example in the component Case category (BC:10874). |
| 31523 | Resolved an issue where pricing information would include redundant spaces around the = symbol if the Suffix option was enabled in the part provider Parameter Import Options. |
BOM
| 27304 | Fixed bug where BOM output report to template loses formatting when 'MS Excel File' format type is selected. |
| 28895 | Fixed an issue where the BOM Checks validation report, defined in an Output Job file, would never fail - as part of board release using the Project Releaser - when at least one fatal error exists. |
| 29347 | Resolved an issue where an MS Excel File (*.xls, *.xlsx) format BOM would sometimes cause an error while attempting to apply the selected Excel template. |
| 29373 | Added the ability to select and use file-based Library components ('unmanaged' components) when changing/replacing existing components from the ActiveBOM. |
| 30375 | Fixed bug that prevented the ActiveBOM line Start number being set to greater than 1000 in the Line |
| Options dialog. | |
| 30803 | Resolved an issue where the BomDoc settings, such as Solutions per Item, were not propagating through to the OutJob or the BOM Report. |
| 30986 | Fixed issue where hidden Excel sheets in the template were not recognized for BOM reports (BC:10638). |
| 31269 | Fixed bug where ReportDate field is incorrect in BOM generated from Template when System Region is set to Dutch. |
| 31682 | Fixed an issue where an exception was being thrown when attempting to generate a BOM report in Excel format ('Exception from HRESULT: 0x800AC472'). |
PCB
| 24898 | Fixed bug that prevented DRC violations (such as clearance issues) being detected in folded rigid-flex board designs (BC:9007). |
| 25738 | Additional PCB object snapping options implemented through the Board Properties panel (popup shortcut CTRL+E) (BC:7998; BC:5591). |
| 25883 | Fixed PCB primitive positional data rounding bug, as observed in the Properties panel when multiple aligned pads are selected. |
| 27818 | Fixed bug where, under certain conditions, Waived Violations would return as Violations after running a design rule check. |
| 28440 | Fixed bug where PCB Layer Stack Table could not be manually resized using its object handles. |
| 28447 | Fixed regression where Polygon or Region vertices data could not be pasted, or imported from a CSV file, into the Outline Vertices section in the Properties panel (BC:9873). |
| 29574 | Fixed regression where all Pads/Vias are shown in the 'Update Pads/Vias' dialog rather than just those that require updating. |
| 29889 | Fixed regression where the PCB editor Dim, Mask and Net highlighting modes would reset after the display has been cycled between 2D and 3D modes. |
| 30081 | Correct impedance profile is now loaded into the rule after importing stackup file. |
| 30350 | Fixed layer stack Material Library bug where all mandatory parameter fields were not shown for a new material entry if columns have been previously hidden. |
| 30528 | Fixed bug in IPC-2581 output generator that caused incorrect board outlines by rendering Arcs is the wrong rotational direction (BC:9884). |
| 30550 | Fixed bug that caused a crash when the system language is set to Korean and a Design Rule file (*.RUL) is imported. |
| 30706 | Fixed memory leak bug in router engine used for processes such as Move Component and Interactive Routing. |
| 30776 | Fixed issue where xSignals became to be broken after PCB Re-Annotation (BC:9862). |
| 30817 | Fixed bug where saving a corrupted STEP footprint model along with other footprints would cause all STEP models to be converted to extrusions. |
| 30913 | Added common default PCB snapping settings in Properties Panel and Active Bar (Shift+E to cycle snap options, CTRL+E to popup snapping options). |
| 30927 | Fixed regression that prevented the specified layer of an active Layer Set being restored after a different layer was made active. |
| 30934 | Quick access to snapping was added in Active bar. Snapping options now available during interactive processes (shortcut Ctrl+E) (BC:9759). |
| 30938 | Resolved an issue where changing the design rule scope and re-running the DRC could cause an access violation. |
| 30964 | fixed an issue where were no possibility to export/import mechanical layers and layer pairs in PCB Library. |
| 30982 | Fixed regression that caused a violation when placing an embedded board array. |
| 31012 | Restored PCB dimensioning features: Center, Baseline dimensions, and Linear and Radial Diameter dimensions (BC:8946, BC:9257, BC:8936). |
| 31026 | Fixed bug where mechanical layer primitives were included in a component bounding box definition (BC:1261). |
| 31033 | Added ability to manage the columns display in the Layer Stack Table - show/hide, edit names and modify the order (BC:7597). |
| 31036 | Added Gerber Name column availability to Layer Stack Table (BC:3623). |
| 31037 | Added calculated Total Board Thickness option to Layer Stack Table (BC:9225). |
| 31038 | Updated Layer Stack Table layer numbering to be synchronized with the copper layer numbering in the Layer Stack Manager (BC:10123). |
| 31039 | Resolved an issue where PCB cutouts were included in print outputs (BC:461). |
| 31133 | 3D Body placement split into two commands - use Place » 3D Body to place an MCAD model, or use Place » Extruded 3D Body to commence interactive placement of an extruded 3D Body object (same behavior as the AD19.0 Place » 3D Body command) (BC:10675; BC:9734). |
| 31135 | Updated 2D/3D functionality so that an object's 2D geometry is still visible when its 3D body Opacity is set to 0% (BC:1867). |
| 31141 | Fixed bug that caused a Gerber output to generate Mid Layer Pads in incorrect positions when the board source is a Mirrored Embedded Array. |
| 31168 | Fixed bug where the Plated Via information was missing from Gerber X2 outputs generated from an embedded board array (panelized source). |
| 31169 | Fixed bug where the Slice Track feature was not available in the PCB Library editor (BC:8943). |
| 31296 | Fixed an issue that caused Display Clearance Boundaries when routing to be blocked/overlapped by polygons. |
| 31323 | Added ability to set PCB Keepouts to Draft, Hide and variable Transparency (BC:10357; BC:10292). |
| 31339 | Added layer color crosshatch fills to PCB Keepouts (BC:4750). |
| 31356 | Added Properties support for the columns management in Layer Stack Table (BC:7597). |
| 31368 | Fixed regression where xSignal values are shown as 'BROKEN' for particular PCB design documents. |
| 31434 | Resolved an issue in the IPC-2581 output where nets connected by a net-tie were reported as different nets. |
| 31612 | Restored PCB Sheet Settings for Board options layout in the Properties panel (BC:8600). |
| 31622 | Resolved an issue where the copy/paste reference point was not defined correctly when pasting. |
| 31648 | Fixed an issue in PCB where zero-length tracks were added if the component was moved in some specific situations. |
| 31649 | Resolved an issue where DXF/DWG export would report "Failed to export", even though the DXF/DWG file was correctly generated. |
| 31675 | Resolved an issue where changing the relative origin would set it 1 grid unit left of the click location. |
| 31842 | Fixed an issue where the X, Y coordinate values from the PCB list panel were changed to incorrect values when using decimal "," symbol in Windows Regional settings. |
| 31893 | Fixed regression that caused all pads and vias to be displayed when invoking the Update Pad/Via Templates command even though they did not need to be updated. |
| 31942 | Fixed bug where the 'Keepout Region' was replaced by 'Copper Region' during the "Make PCB Library" process (BC:5538). |
| 32063 | Fixed issue that caused Xsignals to break after routing was completed by manually moving tracks or by interactive routing. |
| 32070 | Added option to "Merge Net-Tie Nets" for ODB++, IPC-D-356A and IPC-2581 output (BC:961, BC:3738). |
| 32102 | PCB Snapping Options have been updated with separate Grids, Axes and Guide options. Also snapping To Grids and Guides now works independently on Global enable\disable options (shortcut Ctrl+E). |
| 32122 | The Mechanical Layer number is now shown in the View Configuration Panel. |
| 32163 | Fixed bug where the HDI - TH vias were absent in NC Drill output if there were uVias with the same Start Top and Stop Bottom layers (BC:11078). |
| 32190 | Fixed an issue with Interactive length tuning 'From Rules' when changing Target length causes causing continuous DRC loop until an accordion is unselected. |
| 32208 | Fixed crash when opening a specific PCB document if the PCB List Panel is open. |
Draftsman
| 18437 | Added Draftsman X/Y axis scale object that can be placed and attached between any two drawing viewpoints. |
| 21531 | Added Draftsman Bookmarks TOC data to its PDF output generation process (BC:6614). |
| 25612 | Added ability to place dimensions to any primitive (BC:7287; BC:9574). |
| 30379 | Column Physical Layer Number was added to the Layer Stack Legend in Draftsman. |
| 30587 | Added Draftsman capability for a single Callout to apply to multiple sources/points on the document. |
| 30753 | Fixed bug that prevented the placement of Draftsman drawing views if components have a '/ ' character in their name and FIPS system cryptography algorithms are enabled (BC:10507). |
| 30838 | Fixed Draftsman regression that caused drill Symbols to be flipped (mirrored) in a placed Drill Drawing View. |
| 31382 | Fixed regression that caused a Draftsman document to not be allowed to be saved after importing changes from the PCB document. |
| 31514 | Fixed font rendering bug in Draftsman Assembly Drawing output caused by a recent Windows update "1809" (BC:10498). |
| 31634 | Added Diameter Dimension object to Draftsman. |
| 31683 | Fixed an issue where layers were missing a Fabrication View on certain Draftsman document designs, despite graphics still being present on the PCB. |
| 31714 | Fixed regression where snapping was displaced while editing objects in Draftsman. |
Multi-board
| 27474 | Fixed bug in Multi-board PCB display where Arcs on solder Mask layers were not being shown. |
| 28996 | View Configuration panel added to the Multi-board Assembly Editor. Use the panel to configure the Projection style, the Section View mode and planes, and the System Color assignments. |
| 29687 | Restored the ability to change PCB layer visibility in the Multi-board Assembly panel (BC: 10616). |
| 30163 | Section View now supports separate X, Y and Z section planes. Planes are are enabled and their orientation set in the View Configuration panel. Section View has 3 display modes, Off, On (sectioning applied, planes not visible), and Edit (sectioning applied, planes visible and editable). Drag a colored axis handle to move that section plane. |
| 30194 | Fixed 3D rendering issue in Multi-board Assembly view that can occur with PCB designs that include extruded 3D bodies. |
| 30199 | Fixed bug where blind vias were displaying as thru-hole vias. |
| 30496 | Added Multi-board option to skip free 3D bodies during ECO or when importing board file. |
| 30497 | Added Multi-board options to set components or STEP models to semi-transparent (BC:9454). |
| 30674 | Added OutJob support for exporting Multi-board Assembly as STEP or Parasolid X_T output. |
| 31071 | STEP models in a Multi-board assembly can be updated via the new right-click > Update Selected 3D Body command, the object's location and user-defined Mates are retained. |
| 31346 | Resolved an issue where the Multi-board schematic editor would display the From pin as the To pin in the Connections section of the Properties panel. |
| 31772 | Added keyboard shortcut L to open the Multi-board Assembly View configuration panel. |
Components Panel
| 28243 | Components panel - Favorites feature added to the Parameters listed in the Details section, now lists starred (Favorite) parameters when the list is in Show Less mode. Expand parameter list to access star feature, right-click to reset. |
| 29386 | Updated Components panel to not show PCB Library files when only a schematic type file is open for editing. |
| 29890 | Fixed bug in Components panel where a Favorite filter (starred) was not correctly retained between sessions or panel instances and did not appear at the top of the Filter listing. |
| 30441 | Fixed Components panel bug where its Categories navigation tree did not refresh after the Component Types list has been edited in Preferences. |
| 30608 | Added 'Find Similar Components' feature to the Components panel - accessed by right-clicking on a listed component. |
| 31072 | Fixed regression where the order of file-based libraries listed in the Components panel did not match that specified in the File-based Libraries Preferences (BC:10464). |
| 31201 | Improved Components panel Categories loading speed when a large number of unmanaged (file-based) libraries are installed. |
| 31288 | Added ability to select then edit or add to an active Search string 'breadcrumb' in the Components panel and the Manufacturer Part Search panel (BC:10787). |
| 31562 | Fixed an issue where the Components panel did not restore the previous session after re-logging in. |
| 31650 | Fixed an issue that ignored some symbols in the Name field when creating a new component type in the Data Management - Component Types Preferences page. |
| 31806 | Fixed regression issue with Components panel when using SvnDbLib. Refresh Library now works as expected after updating the SvnDbLib (BC:1195). |