Altium Designer 版本发布说明
Created: 十二月 19, 2016 | Updated: 十一月 01, 2024
| Applies to version: 15.1
您正在阅读的是 15.1. 版本。关于最新版本，请前往 Altium Designer 版本发布说明 阅读 25 版本
The following sections list the release notes for publically released versions of Altium Designer 15.1 and Altium Designer 15.0
Version 15.1.16
Build: 63332 Date: 2 June 2016
| 7492 | Restored the ability to edit holes in the Hole Size Editor mode of the PCB panel. |
| 7500 | Resolved issue that caused first Interactive Length Tuning to be deleted after adding second one to a net. |
| 8318 | Resolved issue with memory leaking during compilation of Integrated library. |
| 8408 | Resolved an issue where items that were added to Vaults were not shown after clicking "Refresh" button. |
| 7001 | Resolved an Altium Designer access violation error that could occur when opening PCB documents during PCB design collaboration. |
| 7491 | DRC processing for Board Outline Clearance between complex pads and exterior board edges has been corrected. |
| 8473 | Resolved an issue with wrong polygon mapping while import board from Eagle. |
| 8489 | Fixed an issue that leading to crash during BOM report generation. |
| 8557 | Resolved an access violation error that occurred when importing a PADS Logic ASCII (.txt) file. |
| 8649 | Restored ability to use "ShowDialogWithCaption" function in the scripts. |
| 8650 | Resolved issue with BOM generation for fitted/not fitted variants components. |
| 8651 | Altium Designer no longer crashes when two or more ports are added to multi-channel design simultaneously. |
| 8653 | Toggle Fitted/Not Fitted works correctly for multi-part variants components (BC:4929). |
| 8655 | Fixed regression issue with "Place>Directives>Specific No ERC" not picking compiler violation. |
| 8916 | The issue of special strings with delimiter characters not being interpreted correctly during assembly drawing generation has been resolved. |
| 9198 | Resolved an issue with Altium Designer's Orcad exporter where an exported library was empty or the exported design caused Orcad to crash. |
| 12040 | STEP and IDF exports no longer produce faceted edges in circular board cutouts (BC:365). |
Version 15.1.15
Build: 50867 Date: 14 September 2015
| 7073 | All properties in the State Properties dialog (when configuring a lifecycle definition) are now visible (BC:5630). |
| 7460 | Fixed issue with compiler warning being incorrectly displayed for broken links between Schematic components and Variants definition in a multi-channel design |
| 7496 | Polygon pours no longer cause clearance violations after Altium Designer is updated to newest version. |
| 7497 | The "Convert Special Strings" option no longer gets disabled after starting an Output Job file which is using the PCB document as its Data source. |
| 7499 | Special strings whose parameter names include '-' are now correctly converted. |
| 7501 | Access violation in module "TKShHealing.dll" no longer occurs during STEP export. |
| 7502 | The Text Position property for dimension text is now correctly set to Manual when that text is manually repositioned (BC:5724). |
| 7522 | Resolved an issue whereby the required lifecycle definition was not being applied during item creation, when the item type had more than one lifecycle definition assigned to it. |
| 8128 | Length tuning for differential pairs no longer creates violations with the board outline. |
Version 15.1.14
Build: 47215 Date: 22 July 2015
| 6370 | The Symbol Generator now correctly observes units for default pin lengths during component creation |
| 6771 | Resolved an issue where opening a PcbDoc containing a Design View could result in the software entering into an infinite loop. |
| 6843 | Footprint with ".Comment" special string no longer displayed as mismatched after running footprint comparison via "Tools>Update from PCB Libraries". |
| 6886 | A PCB created in AD14.3 no longer loses relief polygon connections when it is opened in Altium Designer 15.1 and the polygon is repoured. |
| 6915 | The time taken to compile a schematic project has been reduced (BC:5495). |
| 6938 | PCB panels whose child PCB designs contain Component refdes, Component comment, and dimension text now produce proper Print and Assembly output to PDF documents (BC:5716). |
| 6960 | Resolved an issue where a new project being created from a template would point to the wrong OutputJob file. |
| 7022 | Resolved an issue when unique identifier errors appeared after updating a modified schematic symbol using the "Tools >Update Schematics command". |
| 7070 | Resolved an issue with Undetectable Short Circuit in Schematic when Blankets are used |
| 7085 | Resolved an issue where the designators were incorrectly placed in the generated PDF output if they were on a mechanical layer in an embedded board array (BC:5714). |
Version 15.1.13
Build: 46088 Date: 2 July 2015
| 4814 | Altium Designer no longer crashes on start, in environments utilizing a roaming profile (BC:5218). |
| 6410 | Several fabrication and assembly output issues concerning TrueType special String conversion, location, and justification, have been resolved (BC:5521). |
| 6566 | Invalid files nor longer generated during export to Parasolid (BC:5650). |
| 6574 | The PCB can now be exported in PDF3D format, directly in the Project folder. This fixes the issue where a blank PCB was being created, that overwrote the existing PCB document. |
| 6577 | Fixed issue with non-editable via sizes during routing. |
| 6587 | Availability of Component State validation has been restored in OutputJobs. |
| 6590 | An issue with Altium Designer licenses not being recognized when using Private License Server v14.0.0.33 (or earlier), has been resolved. |
| 6607 | The MCAD collaboration standalone license no longer needs to be re-activated every time Altium Designer starts. |
| 6672 | All cell data is now loaded properly when opening older CmpLib files in Altium Designer 15.1 (BC:5601). |
| 6050 | Multiline strings with CR LF now display correctly in PDF3D export. |
| 6601 | An issue with the Symbol Wizard window not being movable, has been resolved. |
| 6768 | The Component Template (CMPT) Editor is now compatible with Altium Designer 15.1. |
Version 15.1.12
Build: 45129 Date: 2 June 2015
| 6292 | Restored the possibility to change lifecycles when working with versions of Altium Vault earlier than 2.5. |
| 6317 | Undo of component layer flip no longer modifies the component's Flipped On Layer property. |
| 6409 | Resolved an issue when managed project was invisible in Altium Designer when it was created in repository which URL had "/" at the end. |
| 6427 | Resolved an issue when generation STEP file from output job was impossible. |
| 6239 | False violations of Board Outline Clearance rule no longer occurs for primitives on Mechanical layers. |
| 6277 | Resolved an issue with schematics where the compiler did not highlight an error for components which have duplicate designators (BC:5449). |
| 6349 | Altium Designer no longer crashes when rendering a solder mask for pads, after switching from 2D to 3D. |
| 6351 | Altium Designer no longer crashes when user removes polygons imported from Camtastic. |
| 6369 | Restored the ability to change all selected cells at Next State column in Batch. |
| 6376 | Extruded 3D Body objects converted to STEP in Altium Designer Versions 15.0 and earlier now retain their shapes in Altium Designer Version 15.1 (BC:5467, BC:5511). |
| 6013 | Resolved an issue with component rotation during Eagle import with non US regional settings. |
| 6040 | Objects selected in PCB Layout using the Board Insight panel now correctly update the PCB Inspector panel. |
| 6284 | Added the option to display mechanical layers in board planning mode. |
| 6310 | Fixed crash during sequential repour of overlapped polygons. |
| 6439 | Resolved an issue with SchLibGenerationTool when data copied from Excel was pasted into the first several cells of the wizard, and the other cells were pre-selected (BC:5506, BC:5491). |
Version 15.1.9
Build: 44146 Date: 8 May 2015
| 6266 | Altium Designer no longer hangs after setting 3D Body height in 3D mode. |
| 6256 | Explode polygon to free primitives now works properly. |
| 6190 | F1 now works properly for newly added dialogs. |
| 6077 | Import of an OrCAD 16.3 DSN using Import Wizard no longer misses multiple pages. |
| 6041 | Multiline text is now properly converted to strokes and polygon during generation of certain export formats. |
| 5030 | Functions InNamedUnion('Name') and InUnion(ID) are now available in scripting system and rule queries. |
| 4887 | Fixed issue with wrongly formed thermal connections when certain settings were used (BC:5450). |
Version 15.1.8
Build: 44021 Date: 4 May 2015
| 4300 | Pad and Via Solder Mask Expansion can now be applied from the hole edge, as well as from the Pad/Via's copper shaped edge. |
| 4588 | "Bikini Coverlay" is now supported, enabling proper surface film outputs for flexible sections, including expansions. |
| 4555 | A Board Outline Clearance (Manufacturing) rule has been added to the PCB Layout Editor to constrain the proximity of objects to various types of board edges. |
| 4936 | When a via instance's layer span property is required, users can now specify a drill pair and optionally access the Drill-Pair Manager. |
| 4992 | Provided the possibility to generate 3D PDF of PCB-assemblies. |
| 4554 | Added Smart Union management, a new Union mode on the PCB panel that allows the designer to review and manage Union types, Unions, and Union primitives. |
| 4649 | Drill Drawing layer is now live, displaying drill symbols once a drill table has been placed or when the drill symbols have been configured for display. |
| 4779 | Added a new "Pad and Via library" feature that allows for the creation of reusable pad and via templates. |
| 1606 | The PCB Layout Editor's String object has been enhanced to support multi-line text, by allowing carriage returns to be embedded in the text and resizing of the String's bounding rectangle. |
| 4553 | Altium Designer now checks dependencies during polygon repours and provides correct pour order when modifying a shape. |
| 4938 | Provided one way synchronization between Tasking Pinmapper tool and Altium Designer. |
| 4594 | Developed xSignals Wizards which helps to create rules for configuration of length matching rules. |
| 4581 | Polygons can now be automatically named (both initially and upon subsequent changes) according to a user defined naming template. |
| 4771 | Created a Schematic symbol generation tool that reduces time spent on functional symbols creation. |
| 5356 | Developed the possibility to change Layer Color in one output outjob file instead of changing the color in all of them (BC:101). |
| 5448 | In response to several BugCrunch items, a 3D Body's 3D Color property can now be optionally used to override the colors of its STEP Model (BC:154, BC:1255). |
| 5097 | ODB++ supports arc only cut-outs now (BC:5158). |
| 5378 | Component rotation is now correctly exported to dwf/dxf formats (BC:4977). |
| 4682 | Visibility of the comment field on placement from DBLib restored to legacy behavior (BC:4994). |
| 4921 | Resolved an issue where square selectors were not showing after flipping the board (BC:5104). |
| 5190 | Resolved an issue where a BOM is added to a publishing destination and the Excel file is created but the file size is zero bytes (BC:973). |
| 4514 | Fixed an issue with saving menu customizations between sessions (BC:4957). |
| 3986 | When deleting multiple sub-parts of a component in the schematic library editor, the selected components are always the ones that are deleted (BC:4768). |
| 5383 | Ability to set "Not Fitted" for group of selected component has been added (BC:3028). |
| 5456 | It is now possible to switch between 2D and 3D views asynchronously (press 2 or 3), or synchronously (press Shift+2 or Shift+3) (BC:5253). |
| 5516 | TSaveDialog/TOpenDialog can be invoked from the script (BC:5326). |
| 5358 | Resolved an issue with parameters updating if "Auto Position" was disabled in .SchLib (BC:839). |
| 5724 | Resolved an issue with Altium Designer hanging when attempting to import large Allegro design data. |
| 5263 | Access Violation error no longer occurs after OrCAD schematic file import. |
| 4917 | This will allow users who are editing routes or examining trace or x-signals to easily get to the length tune the trace. |
| 4576 | DXF importer no longer causes freezing when DXF files with many splines are imported. |
| 5221 | Release-process into Altium Vault no longer fails due to missing folder generation. |
| 5227 | The legacy “Use Transparent Layers” option is now automatically disabled in place of new layer transparency system. |
| 4748 | Resolved an issue where cross-junction was converted to cross-over after any component or segment of a sketch had been dragged. |
| 3593 | Resolved an issue with dimensions changing incorrectly after a file had been imported from AutoCAD to PCB. |
| 4959 | An issue has been corrected where the layer stack region split line start/end locations self-modified when the user switched in and out of board planning mode. |
| 5076 | Behavior of the PCB Panel's Layer Stack Regions editor has been corrected when PCB Layout Editor is in Board Planning Mode. |
| 5081 | Resolved an issue where the parameter location was changed after updating components from a library. |
| 4520 | Ctrl+C command for 3D mode works now. |
| 4485 | The default footprint is now indicated in the Libraries panel, and used when placing a component. |
| 4583 | Double-clicking on Layer Stack Chart no longer invokes Length Tuning Dialogue. |
| 4885 | Duplicated Menu Shortcut Accelerators were changed to unique. |
| 4433 | Multipart components in xDxDesigner are now treated properly, creating corresponding parts instead of individual components. |
| 5435 | Access check added when saving the BSDL_FileMap.Txt file. |
| 5412 | Gerber outputs no longer lose layers when generated for embedded boards. |
| 5219 | Fanout procedure now follows room and net rules. |
| 4932 | FSO of Pins of SchLib parts with multiple parts works properly now. |
| 5351 | Moving groups of objects is restricted to the area of visibility now. |
| 4758 | IDX import no longer relays on regional date and time format anymore. |
| 5481 | Resolved an issue when placement of DXF was wrong after it was exported via Output Jobfile. |
| 5191 | Resolved an issue where columns were lost after copying the OutJob file from one project to another with the “Include parameters from PCB” setting. |
| 5065 | Resolved an issue where components rotated incorrectly after PCB file had been exported to AutoCAD. |
| 5347 | Resolved an issue when Pad names were incorrect and Net information was missing in ASCII file after PADS import. |
| 4580 | Live Highlighting when the board is flipped now works correctly. |
| 5146 | Pads with the same JumperID but different nets are reported as short circuits now. |
| 3992 | Fabrication output for a vault-managed, panelized PCB design now produces a warning message when the panel PcbDoc and referenced PcbDocs are not members of the same project. |
| 5343 | Violation description for component clearance has been updated to be more informative. |
| 5413 | Fixed a bug with snap to board axis when snapping to embedded board edge. |
| 5345 | Fixed several issues with pre-defined stackups in layer stack manager. |
| 5426 | Testpoint flag is updating now during layer change. |
| 4614 | Resolved an issue where Polygon Hatch does not pour correctly when individual Poly to Via Rule is set. |
| 4436 | Compile Names Expansion setting for Ports now functions correctly. |
| 3939 | PDF output has been corrected when PCB designs contain rounded rectangle pad shapes. |
| 4924 | Resolved an issue where arcs were importing incorrectly from Altium Designer to AutoCAD .dwg. |
| 5534 | The Grid Manager's Snap To Object Hotspot setting now avoids snapping to board outline vertices when the Snap To Board Outline option is not activated in Board Options. |
| 4378 | Issue with disappearing 3D bodies when moving designators in 3D mode has been resolved. |
| 5703 | Resolved an issue where duplicate component IDs not caught during compilation resulted in incorrect schematic to PCB updates. |
| 4901 | Unnecessary & Time Wasting "Analyzing Nets" has been optimized on large designs. |
| 5239 | xSignals no longer crashes after placing or removing free pads. |
| 5625 | Issue with placing manual junction at the position of cross-over has been resolved. |
| 5362 | Error after trying to generate A4-size for PCB has been resolved. |
| 5646 | Resolved issues with creating schematic component from Sheet using Sheet Actions ->Create Component from Sheet. |
| 4222 | Export of square and slot shaped pad holes to Autocad DXF/DWG files have been corrected. |
| 5113 | An odd behavior of PSON in IPC Batch Wizard is fixed. |
| 5722 | Resolved a regression issue when evaluating special string values (document parameters, current date/time) when generating a BOM. |
| 5430 | Resolved an issue with pushing update from net list to PCB. |
| 5316 | Resolved an issue with NoERC markers causing slow project compilation. |
| 5354 | SimView.DLL access violation error no longer occurs while simulating Mixed Sim. |
| 4792 | Fixed an issue with displaying international characters in a BOM report. |
| 5361 | Fixed an issue with layer mapping in PCB Print output settings dialog. |
| 4755 | An issue that resulted in a blank file when generating a pdf from an outjob file for a SimView document has been fixed. |
| 3562 | A problem in the SimModel editor dialog when specifying the pin mapping for components with hidden pins has been fixed. |
| 5028 | Wrong behavior of DPAK in IPC Wizard is fixed. |
| 4622 | Resolved an issue where the wrong DuplicatedID warning appeared when repeated sheet symbols were used. |
| 4914 | Thermal relief generation had been improved. |
| 4483 | The Gerber X2 Apper Function attribute syntax has been improved. |
| 4482 | The Gerber X2 FileFunction attribute syntax has been improved. |
| 5723 | Issue with Schematic compiler producing intermittent crashes when compiling integrated library has been resolved |
| 5023 | Allegro importer does not crash anymore on large designs. |
| 3906 | Resolved a problem with generating large sized PDFs from Schematic documents containing JPEG images. |
| 5348 | Issue with incorrect import of NC Drill table from Allegro has been resolved. |
| 5357 | Resolved an issue with creating unrolled nets when importing ORCAD designs. |
| 5318 | Altium Designer no longer crashes when compiling a project that has many error and warnings. |
| 5363 | Generating Gerber files no longer crashes when PCB document contains an Embedded Board Array that references a PCB document that does not exist. |
| 5145 | Resolved an issue with component clearance checking on imported designs. |
| 4763 | Restored the possibility to copy and paste symbols between components in a Schematic library. |
| 5465 | Resolved an issue for Preview in Print Job where selecting multiple PCB or Schematic documents caused Access Violation or empty preview. |
| 4620 | Resolved an issue when some components were excluded from the Pick and Place file. |
| 5359 | Pins will no longer disappear from SchLib component when importing them from PADS. |
| 5110 | Special strings with parameters containing "-" or "." symbols are now processed properly. |
| 5243 | Ability to create separate net classes for buss sections when pushing updates from Schematic to PCB has been added. |
| 5447 | Provided possibility to update all extensions at once. |
| 5326 | Added support for spline, parabola and ellipse edge types to region/polygon/board outline shapes when collaborating with SolidWorks. |
| 5228 | Fabrication and Assembly Testpoint Style rules now contain properties for controlling clearances between testpoints and neighboring Pad/Via object holes. |
| 5017 | Component type can now be defined directly in pcblib. |
| 5077 | Extension&Updates section shows detailed information and updates released by Altium, without requiring an active Portal session. |
| 4679 | Developed the possibility to autocomplete an expression for scopes based on xSignal and xSignalClasses named in the Query Helper. |
| 4465 | Added ability to suppress updating specific parameters from database when generating BOM report |
| 5355 | Compiler now detects mismatches between project variants and actual Schematic documents and reports warnings. |
| 5341 | Added an prompt to have user restart Altium Designer after installing an extension. |
| 5349 | DRC units window has variable size now. |
| 5063 | Net change for a pad is now automatically propagated to all pads with the same Jumper ID. |
| 4486 | Added an optional 2:6 inches (4:5 mm) precision for Gerber X2 output. |
| 4484 | Added heuristics for Gerber X2 attribute assignment. |
| 4492 | Arcs on all objects are now approximated correctly. |
| 4753 | Board outline export supports preserving arc segments now. |
| 4466 | Schematic annotation now uses a 2 unit scanning grid, supporting correct annotation when designators are slightly out of alignment. |
| 5290 | Added a drop-down list which shows templates for working nets or those which are bigger or less than the allowed size. |
| 4795 | Provided importing support for the latest 16.x Orcad schematic document and libraries. |
| 4984 | Provided support for creating planar capacitive sensor patterns on PCB, for use with the range of Cypress CapSense controllers. |
| 4515 | Added an ability to round up Schematic internal coordinates to compensate for rounding problems when switching from imperial to metric units. |
| 4450 | Resolved an issue where arcs were flipped when DWG file was imported into a PCB. |
Version 15.0.15
Build: 41991 Date:16 March 2015
| 4720 | Releasing a managed project to Altium Vault for a second time no longer reports a Release.Log error. |
| 5205 | Resolved issue where changes made to an Output Job from the Configuration Manager are not saved (BC:5258). |
| 4999 | Intermediate files no longer be removed during synthesis. |
| 5111 | Improved stability of Allegro importer when working with large designs. |
| 5257 | Resolved issue where running an FSO on pins from multiple parts results in none being selected. |
| 5258 | Resolved issue when deleting multiple sub parts of a component in the schematic library editor, the selected components aren't always the ones that are deleted (BC:4768). |
| 5260 | Special strings with parameters containing "-" or "." symbols are now processed properly. |
| 5262 | Re-annotate works properly now for components initially placed on the PCB. |
| 5264 | A proper DuplicateID warning is shown for cases when repeat sheet symbols are used. |
| 5410 | Resolved an issue with saving menu customizations between sessions (BC:4957, BC:5299). |
Version 15.0.14
Build: 40656 Date:19 January 2015
| 4317 | Rotation of components is now correctly exported to dwf/dxf formats (BC:4977) |
| 4892 | Fixed generation of pdf file via outputjobs when parametric file name is used |
| 4899 | Fixed issue of Japanese translation that prevents PCB document to be loaded |
Version 15.0.13
Build: 40581 Date:16 January 2015
| 4634 | Length calculation is now taking into account through-hole pins height |
| 4367 | Fixed Protel PCB 2.8 export |
| 4401 | "Create xSignals from connected net" command now has dedicated dialog |
| 4601 | Issues with layer disappearance while working with rigid -flex layer stack |
| 4656 | Components with @ in UniqueID are now properly included into Pick&Place files |
| 4663 | Gerber generation of embedded board referencing non existent pcb document do not crashes anymore |
| 4738 | Altium Designer do not hangs anymore during Spectra files import (BC:5054, BC:5047) |
| 4747 | Exception while working with split planes was fixed (BC:5059) |
| 4825 | Task with DrillDrawing printed to pdf do not prevent release to Vault anymore |
| 4207 | The option "Always repour polygons on modification" has been added to the PCB Editor - General page of the Preferences dialog (BC:5010). |
| 4394 | xSignal length calculation includes path inside of the component (as shortest path between pads) |
| 4650 | Fixed work of copy/paste between components in schlib |
| 4745 | Chinese (Traditional) translation was updated |
| 4793 | Resolved problem with pdf file opening using FoxirReader |
| 4812 | Altium Designer detects Component Clearances correctly |
| 4833 | Fixed error with downloading released data via web browser |
| 4836 | Device Support Report no longer crashes |
| 4845 | IPC2581 output can now be generated via PCBReleaseView |
Version 15.0.8
Build: 38726 Date:26 December 2014
| 4206 | IPC Footprint Wizard - PSON Solder Mask Expansion default setting changed back to "Expansion value from rules" |
| 4261 | Altium Designer no longer requests that Adobe Reader be installed on the system. |
| 4396 | Issues with opening older Protel/Altium designs have been resolved. |
| 4417 | If an Outjob PDF included =VariantName in the filename it could cause an exception, this no longer occurs. |
| 4438 | Acrobat Reader XI is now properly recognized by Altium Designer |
| 4443 | Fixed error with Pin Swapping affecting xSignals |
| 4444 | Import MCAD IDX menu entry moved to the File В» Import menu. |
| 4446 | Altium Designer no longer hangs while generating Board Stack report (BC:5002) |
| 4447 | Excel processes no longer remain running after Excel-based report generation. |
| 4449 | Redundant dialog about shelved polygon removed from STEP exporter |
| 4452 | Proper net name is being shown for shelved polygons in Polygon Manager |
| 4458 | Ctrl+R (Rubber Stamp) now works correctly in the Schematic editors. |
| 4478 | "Invalid argument to date encode" error during release to Vault is fixed |
| 4479 | Fixed naming of features in exported step files |
| 4487 | Fixed CADSTAR schematic importer |
| 4493 | Fixed crash in cmplib while openning file with models requiring update |
| 4497 | Certain editing scenarios could result in an exception in the schematic editor (error details included "read of address 80808088"), this no longer occurs. |
| 4504 | New polygons were immediately shelved in some installations of Altium Designer, this no longer occurs. |
| 4506 | Fixed issue with sch print via PDF printer in outputjob (BC:4947) |
| 4537 | Fixed disappearing wire dragging in sch |
| 4539 | It was not possible to have CmpLib folders of the same name, with a different path - this has been resolved. |
| 4560 | xSignal related length matching DRC are now shown in report and violations panel (BC:4960) |
| 4586 | Fixed Orcad importer |
| 4590 | BOM generation do not hangs anymore, when ActiveBOM is used as source with Variant switch |
Version 15.0.7
Build: 36915 Date:17 November 2014
| 1015 | Support for high DPI screens using oversized fonts has been reviewed and improved. |
| 1335 | PCB NC drill layer pair reports now correctly report layer spans for blind/buried via holes, when layers are shuffled out of default order. |
| 1381 | Export to AutoCAD now correctly includes thru-hole pad geometries and holes. |
| 1382 | After certain editing sequences the PCB editor would incorrectly switch to masking the display, this no longer occurs. |
| 1408 | IDF export now includes an option to export in Unicode format. |
| 1615 | Changing PCB layer names could result in layer-related lists populating incorrectly and certain outputs not generating correctly, this has been fixed. |
| 2613 | A Vault Content Cart can now target regular folders. |
| 2816 | It is now possible to define a CmpLib Component Naming scheme using a template with values from any parameter, for example CMP-[Value]-[PackageReference]-{0001}. |
| 2817 | The CmpLib editor now supports the addition of new parameters via customizable parameter list templates. Click the Required Models/Parameters Add button to access the templates (samples are stored in the \Templates folder). |
| 2855 | Duplicate UniqueIDs are detected by the Schematic compiler and detailed in the Messages panel. Existing duplicate UIDs are also automatically resolved during document loading. |
| 2910 | Release Notes column is now available when using Vault-based libraries in the Libraries panel. |
| 3006 | The Component Cuts Wire mode now functions correctly when the Always Drag option is enabled. |
| 3008 | OutputJob Editor enhanced by the addition of: mouse wheel scrolling & scroll bars when not all Jobs/Containers are visible, drag and drop to change Job order, multi-Job Enable/Disable right-click commands & shortcuts (select the container first). |
| 3026 | Import and Export options are now directly accessible via the Files menu. Save As commands are now used exclusively for Altium file formats. (BC:1812, BC:2731 partial) |
| 3033 | Gerber X2 is now available as an output format. It supports output generation via the PCB editor Fabrication Outputs menu, or via an OutputJob. |
| 3035 | IPC-2581B is now available as an output format. Install the extension and generate output via the PCB editor Fabrication Outputs menu, or via an OutputJob. Download a free viewer from http://www.ipc2581.com/index.php/ipc-2581-files |
| 3081 | The Vaults panel now supports changing the column visibility and order. These changes, along with panel-section resize actions are retained between sessions. |
| 3143 | Timeout errors after releasing project documents to a Vault have been fixed. |
| 3188 | OutputJobs now support using a slash character in the Output Container Name. |
| 3189 | It is now possible to pre-configure the display state of Vault component parameters, via the Vault Folder Properties dialog (Type = altium-component-library) and the Vault Library dialog (add a Vault as a Library). |
| 3205 | Switching from the logical to the physical tab of a schematic no longer leaves artifacts on the screen. |
| 3225 | Schematic dragging has been further developed to improve wire/bus bending and reduce the likelihood of a netlist change. |
| 3227 | Schematic dragging has been further developed to improve object handling and the quality of the result, and reduce the likelihood of a netlist change. |
| 3232 | Polygon vertex deletion using Ctrl+Hover+Click is now working correctly. Hold the left mouse button down as you click, until the vertex disappears. |
| 3251 | Releasing projects to the vault with file-locking being enabled works correctly now |
| 3272 | The schematic library editor panel now supports standard copy and paste shortcuts, Ctrl+C and Ctrl+V. |
| 3293 | BOM filters no longer mix up the parameters. Note that for an existing BOM the filters must be cleared, the BOM saved, closed and re-opened, and the filters re-defined. |
| 3338 | Multi-net routing no longer creates a clearance violation at corners when the Converge shortcut (C) is pressed. |
| 3341 | When a PDF is generated from a schematic that includes a hyperlink, clicking the hyperlink now opens the target web page correctly. |
| 3357 | Teardrop removal speed has been improved. |
| 3381 | Second click to select an individual segment in a schematic wire now works correctly. |
| 3412 | The issue with not being able to close documents having "=" character in their name has been resolved |
| 3419 | When the Interactive Router is in push mode, a via on the pushing net can push other-net objects, including vias. |
| 3423 | A specific Verilog HDL project would cause an AV on compile, this no longer occurs. |
| 3425 | Update from Libraries now correctly preserves existing location and orientation of parameter strings. |
| 3437 | 2D and 3D PCB view orientations are now completely separate, each retains the previous orientation and zoom when switching between the views. |
| 3441 | Pin-pairs have been added to the PCB editor, delivering the ability to define the path and constraints for a signal to travel between a source and destination, through termination components and y-splits. |
| 3442 | The import of complex arc shapes from AutoCAD has been improved. |
| 3443 | The PCB Editor now supports embedding OLE objects, such as Word or Excel documents, into a PCB document (Place В» Object from File). |
| 3456 | Xilinx Vivado toolchain is now correctly detected, and can also be added manually in the FPGA - Place and Route preference settings. |
| 3457 | Split plane editing could occasionally cause an exception, this no longer occurs. |
| 3459 | When a wire is placed perpendicular to multiple schematic pins and then dragged, a wire segment is automatically added between every pin and the wire being dragged. This fix restores previous schematic editing behavior. |
| 3477 | Schematic library editor, the Parameter Manager now supports editing parameters across multiple selected components. |
| 3492 | A warning is displayed when you attempt to complete an invalid blanket (has intersecting edges) in the schematic editor. |
| 3495 | PCB component fanout now functions correctly when there is an unpoured polygon under the component. |
| 3497 | Click and drag to move a group of selected objects now be functions correctly. |
| 3498 | An exception that occurred during import of specific DxDesigner projects has been resolved. |
| 3514 | PCB Step model import has been enhanced with better support for curved shapes. |
| 3521 | Fileless editing of an external SIM model no longer generates an AV. |
| 3528 | AVS 1.1 is now supported by Altium Designer 14.3. |
| 3529 | Component pads placed on a signal layer other than top or bottom could not be edited in certain layer-stack configurations, this no longer occurs. |
| 3530 | Top and Bottom Solder Mask layers are now included in the PCB Filter panel's Layer list. |
| 3546 | The IPC Footprint Wizard now previews 2-pin and 3-pin DFN component correctly. |
| 3551 | Schematic auto-junctions now size correctly regardless of the wire width. |
| 3556 | Component primitives placed on mechanical layer 17 or higher now have their layer displayed correctly in the Components mode of the PCB Panel. |
| 3560 | It is now possible to connect to an SVN repository with a user name containing the @ character. |
| 3561 | The correct Lifecycle and Naming Schema is now being loaded during CmpLib file-less editing. |
| 3567 | Model selection drop-downs in the CmpLib editor now display the Lifecycle state in color. |
| 3568 | The Vaults panel now shows the Note data from the correct Lifecycle state. |
| 3576 | PDF generated by running OutputJob can be opened directly from OutputJob document |
| 3577 | Simulation model pin mapping now works correctly in the CmpLib editor. |
| 3585 | Pin swapping was not correctly generating an ECO after performing PCB pin swapping, this has been resolved. |
| 3592 | The path tracing routines used for creating a polygon from selected primitives have been improved, to better handle small objects and multiple paths. |
| 3598 | From-To panel now shows length taking via heights into account |
| 3611 | The schematic Place Wire command now correctly retains the corner mode used in the previous wire placement. |
| 3626 | Vault-defined part choice currencies are now used in Altium Designer supplier dialogues |
| 3633 | Updating Altium Designer from an NIS no longer requires a current Portal connection. |
| 3634 | "Access denied" error when installing an update from NIS has been resolved |
| 3640 | Support for rectangular-shaped pad holes has been added |
| 3664 | PCB exception while re-building a net to an arc center point in a specific design no longer occurs. |
| 3681 | Plane connects (thermal reliefs) are now shown correctly when board is flipped |
| 3689 | Exception no longer occurs when choosing PCB font style in VariantManager (BC:4664) |
| 3692 | Pads with rotated square holes no longer show copper still being present after running the Remove Unused Pad Shape command. |
| 3695 | GOST specific documents can now be generated in BOM Report outputs |
| 3707 | "No model link found for component" error no longer occurs while editing old cmplib files |
| 3708 | Clicking on a supplier part number in the Vaults panel no longer causes an exception. |
| 3721 | Occasional exceptions during a print preview no longer occur. |
| 3722 | Under certain conditions changes made in the Variant Management dialog could cause an exception, this no longer occurs. |
| 3729 | The Variant Management dialog now immediately reflects changes to components, such as clearing or choosing an Alternate Part, improving usability. |
| 3732 | The Edit action is now available when right-clicking in the Search results panel in the VaultExplorer |
| 3736 | Fixed error while releasing Vault revisions with extra long file and path names |
| 3737 | Changes to Comment and Description are no longer lost during component release from the CmpLib editor |
| 3739 | A Length column has been added to the Primitives table in the Nets view of the PCB panel |
| 3755 | Scope section of the Teardrops dialog was modified to distinguish TH and SMD pads |
| 3757 | Duplicate Port UIDs no longer cause Port names to be changed when generating a PDF from the schematic. |
| 3774 | Under certain conditions, schematic compile masks did not exclude components or net objects underneath them, this has been resolved. |
| 3778 | On a schematic with a lot of wiring, placing a wire with the Break Wires at Autojunction option enabled was very slow, this has been optimized. |
| 3779 | Improved performance of selection and zooming in Schematic in comparison with 14.3 |
| 3785 | Under certain conditions it was possible to get the PCB Layer Stack Manager graphical representation out of sync with the tabular layer detail region, this has been resolved. |
| 3787 | The "Print as a single job" option in Output Job File documents now properly combines the separate documents to a single print output |
| 3789 | PCB re-annotation on a variant design with not-fitted parts could result in the varied parts becoming out of sync, this no longer occurs. Note: PCB re-annotation on a design that uses alternate parts with different footprints is not yet supported. |
| 3792 | STEP models from Inventor 2014 are now loaded without errors |
| 3800 | Variant PCB drawing options have been updated to make it easier to understand how Not Fitted components are displayed. |
| 3809 | It is now possible to specify different values for solder mask expansions for top and bottom layers |
| 3834 | Empty surface constructs are now suppressed in ODB++ fabrication output. |
| 3835 | The IPC footprint wizard now correctly supports defining PLCC packages with different D and E pin counts, allowing packages with any even number of pins to be created. |
| 3836 | Dragging multiple schematic wire ends could occasionally result in one wire being shorter than the rest, this no longer occurs. |
| 3841 | Reset All command added to the Variant Manager, use this to restore all parameters to alternate or base component values. |
| 3844 | The issue resulting in "I/O error 103" error message when some of the project files are read-only has been resolved |
| 3845 | The speed of updating from libraries or a database has been improved for designs that include variants using alternate parts. |
| 3849 | In certain circumstances a component would still be shown as varied after resetting parameter variations, this has been resolved. |
| 3857 | Polygon management was improved in comparison with 14.3 (restored shelving, modified concept) |
| 3875 | The Vaults panel right-click menus now display correctly when Display scaling is being used. |
| 3876 | Elements of the Vaults panel were being compressed when Display scaling is being used, this no longer occurs. |
| 3888 | Crash reports can now be send from behind a proxy |
| 3889 | Simulation Waveform viewer print preview issue has been fixed. |
| 3900 | Class generation settings are now stored for device sheets (BC:3840) |
| 3903 | The time to open the PCB Classes dialog has been substantially reduced, particularly on designs with a large number of classes. |
| 3972 | ODB++ output did not generate drill data for drill holes included in a panel, when none of the embedded boards had drill holes, this has been resolved. |
| 3984 | Drawing of Schematic Blanket directives has been further optimized to get them to draw quickly and also correctly display the fill color. |
| 4005 | Variant designs that include alternate parts with different footprints can now be re-annotated in the PCB editor. |
| 4016 | PCB DRC now supports stacked alternate parts in a variant-based design. |
| 4049 | Signal length column was added to Nets panel (this length is being calculated using more precise xSignal engine) |
| 4062 | All extensions within a group can now be installed in a single action. |
| 4069 | Some PCB dialogs were ignoring the board units and always displaying in mils, this no longer occurs. |
| 4076 | Modified Polygon rule support check for shelved polygons |
| 4083 | During import of a P-CAD PCB file the layer types are now correctly detected and assigned for all possible layer configurations. |
| 4092 | The DRC Violations Display page of the Preferences dialog now displays the complete list of Display Style entries when Windows display scaling is being used. |
| 4098 | An AV could occur while placing a pin in a schematic library and pressing Esc to quit the command, this no longer happens. |
| 4111 | With a specific combination of preferences, placing a component from the schematic libraries panel could cause Altium Designer to crash, this no longer occurs. |
| 4121 | After configuring components for pin swapping, it is no longer necessary for the designer to manually recompile the design to make those swap configurations available. |
| 4133 | Changes made in the FPGA Signal Manager are now correctly added to the constraint file. |
| 4135 | Silk to Solder Mask design rule now correctly detects both silk to solder mask or silk to copper rule check configurations. |
| 4215 | When a polygon is shelved, connections created by the polygon are maintained internally so the connection lines will not be displayed. |
| 4351 | NIOS II CPU does not generates with Altera Quartus version 13.0 or later |