Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PcbDrawing_Dlg-FillStyleFill Style_AD
Created: 五月 17, 2016 | Updated: 六月 17, 2017
| Applies to versions: 16.1, 17.0 and 17.1
您正在阅读的是 17.0. 版本。关于最新版本，请前往 PcbDrawing_Dlg-FillStyle((Fill Style))_AD 阅读 22 版本
The Fill Style dialog.
Summary
The Fill Style dialog allows you to customize the display color and pattern for each layer in a Draftsman document.
Access
The dialog is accessed in the following ways:
- From the Layer Information dialog, click
next to the Fill option. - From the Component Display Properties dialog, click in the Hatching Pattern region.
- From the General tab of the Draftsman Document Options dialog, click in the Hatching Pattern region.
Options/Controls
The preview image on the right-hand side reflects options selected in the dialog.
- Pattern - Select an existing pattern from the drop-down (
ANSI 31orANSI 37) or selectSolidfor no pattern at all. - Color - Select the fill pattern color from the drop-down menu.
- Back Color - Select the fill backround color from the drop-down menu. This is the color used when the
Solidpattern option is selected. - Scale - Enter the scale of the fill pattern.
- Rotation - Enter the rotation of the fill pattern.
- Hatch Thickness - Ener the thickness of the lines in the fill pattern.