Altium Designer 文档
Retired Documentation No Longer Applicable to a Later Version of Altium Designer
Retired Documentation - Design Rules
Working with the Nets to Ignore Design Rule on a PCB in Altium Designer
Created: 二月 22, 2016 | Updated: 四月 11, 2017
| Applies to versions: 16.0, 16.1, 17.0 and 17.1
您正在阅读的是 16.1. 版本。关于最新版本，请前往 Working with the Nets to Ignore Design Rule on a PCB in Altium Designer 阅读 21 版本
Rule Category: Placement
Rule Classification: Unary
Summary
This rule specifies which nets should be ignored during autoplacement with the Cluster Placer.
Constraints
None, the rule applies to all nets targeted by the scope (Full Query).
How Duplicate Rule Contentions are Resolved
Contentions are not possible.
Rule Application
During autoplacement with the Cluster Placer.
Tips
- Ignoring power nets can assist in placement speed and quality. If the design has a large number of two pin components that connect to a power net, ignoring the power net will result in these components being clustered based on their other net, rather than the power net.