Altium Designer 文档
Retired Documentation No Longer Applicable to a Later Version of Altium Designer
Retired Documentation - Design Rules
Working with the Length Design Rule on a PCB in Altium Designer
Created: 九月 25, 2019 | Updated: 九月 26, 2019
| Applies to versions: 20.0, 20.1 and 20.2
您正在阅读的是 20.2. 版本。关于最新版本，请前往 Working with the Length Design Rule on a PCB in Altium Designer 阅读 21 版本
Rule category: High Speed
Rule classification: Unary
Summary
This rule specifies the minimum and maximum lengths of a net.
Constraints
Default constraints for the Length rule.
- Length Units - choose this option to define the length as a distance.
- Delay Units - choose this option to define the length as a time (how long the signal takes to travel along that length of route).
- Minimum - the value for the minimum permissible length of the net.
- Maximum - the value for the maximum permissible length of the net.
How Duplicate Rule Contentions are Resolved
All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.
Rule Application
Online DRC and Batch DRC.