Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-ManageDiffPairsFormCreate Differential Pairs From Nets_AD
Created: 一月 16, 2023 | Updated: 一月 16, 2023
| Applies to version: 21
您正在阅读的是 23. 版本。关于最新版本，请前往 PCB_Dlg-ManageDiffPairsForm((Create Differential Pairs From Nets))_AD 阅读 21 版本
The Create Differential Pairs From Nets dialog
Summary
The Create Differential Pairs From Nets dialog provides controls to create differential pair objects using net names conforming to a naming convention with a common prefix, followed by a consistent positive/negative suffix, for example, TX0_P and TX0_N.
Access
The dialog is accessed from the PCB panel by clicking the Create From Nets button (lower left area of the panel) when in Differential Pairs Editor mode.
Options/Controls
The filters at the top of the dialog can be used to show net pairs based on existing net names.
- Use nets from class - click to choose the source net class from which differential pairs will be created. The default is All Nets.
- differing by - specify a suffix for positive and negative nets. The default values are _H and _L.
- to create differential pair with prefix - specify the prefix for positive and negative nets. The default value is D_.
- Create differential pairs in class - choose the target class in which the differential pairs will be located.
- Differential Pairs List - lists all differential pairs created from nets.
- Execute - click to create differential pairs.