Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-FavoriteInteractiveViaSizesFormChoose Via Sizes_AD
Created: 二月 05, 2019 | Updated: 一月 21, 2020
| Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 20.2. 版本。关于最新版本，请前往 PCB_Dlg-FavoriteInteractiveViaSizesForm((Choose Via Sizes))_AD 阅读 21 版本
The Choose Via Sizes dialog
Summary
The Choose Via Sizes dialog allows you to select a via from the list of vias used on the current PCB board. The dialog displays the diameter and hole size of the vias.
Access
The dialog is accessed in the PCB editor by pressing Shift+V while interactively routing (Route » Interactive Routing).
Options/Controls
Select a Via in the left-hand pane of the dialog to view the sizes for that Via. When you select a Via, the right side of the dialog displays information for the selected Via.
- Diameters - this information is for viewing only in the dialog. It allows you to see whether the Via's diameter is set to
Simple(Via hole size and diameter are the same through all layers),Top-Middle-Bottom(different Hole Size and Diameters can be set at Top Layer, Middle Layer and Bottom Layer), orFull Stack(different Hole Size and Diameters can be edited at each layer, including all signal layers and planes). - Hole Size - displays the hole size (the inner diameter) of the Via.
- Diameter - displays the outer diameter of the Via.