Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-EqualizeNetsOptionsFormEqualize Nets_AD
Created: 七月 28, 2015 | Updated: 六月 17, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
您正在阅读的是 17.0. 版本。关于最新版本，请前往 PCB_Dlg-EqualizeNetsOptionsForm((Equalize Nets))_AD 阅读 22 版本
The Equalize Nets Dialog.
Summary
The Equalize Nets dialog is used to match the length of nets identified by the Matched Net Lengths design rule. Before launching the dialog, make sure you have set up a Matched Net Lengths design rule, covering the nets whose length you wish to equalize.
Access
The Equalize Nets dialog can be accessed by clicking Tools » Equalize Net Lengths.
Options/Controls
- Style - Specify the corner style for the tracks. Options include
90 Degrees,45 Degrees, andRounded. - Gap - Specify the gap between two adjacent tracks.
- Amplitude - Specify the tuning amplitude when equalizing nets.