Altium Designer 文档
...
PCB Design Objects in Altium Designer
Working with a Center Dimension Object on a PCB in Altium Designer
Configuring PCB Center Dimension Object Properties in Altium Designer
Created: 十月 22, 2019 | Updated: 四月 09, 2021
| Applies to versions: 20.0, 20.1 and 20.2
您正在阅读的是 20.1. 版本。关于最新版本，请前往 Configuring PCB Center Dimension Object Properties in Altium Designer 阅读 21 版本
Parent page: Center Dimension
PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Center Dimension object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (accessed from the
button at the top-right of the design space). Select Center Dimension in the Primitive List to reveal its options on the right.
- Post-placement settings – all Center Dimension object properties are available for editing in the Center Dimension dialog and the Properties panel when a placed Center Dimension is selected in the design space.
Properties
- Layer - the layer to which the dimension is currently assigned. Dimensions can be assigned to any available layer. Use the drop-down to select a different layer.
- Rotation (Properties panel only) - the angle of alignment of the dimension, measured counterclockwise in degrees from the horizontal.
- Size - the current length of the dimension's crosshair lines (or the diameter of the encompassing circle).